All Activity
- Past hour
-
Will look at this. The way i am using this is is the symbols reference a record folder and a worksheet is used as our legend schedule so the worksheet only places the symbols used in the legend and not every symbol See attached Untitled 9.vwx
-
Hello Alan, Try the Electrical Services Tool in the MEP toolset…
- Today
-
Hi is there a way to have the text in a symbol remain horizontal when i rotate it. Thanks in advance Symble text rotate.vwx
-
It would be nice when using the area retain mode of the Reshape tool to be able to tab in the Area control and set an area you want to target. Default behaviour would stay the same. No new interface is needed.
-
mari.m joined the community
- Yesterday
-
Thanks Scott! that's solved the Data Vis issue, but the symbols still aren't aligning properly. I re inserted the Equipment summary from scratch in case it was a refresh issue. (Now on 2024 Update 5)
-
Wall closure and wall direction not responding properly
Matt Panzer replied to Archistyles's question in Troubleshooting
You’re welcome! -
Wall closure and wall direction not responding properly
Archistyles replied to Archistyles's question in Troubleshooting
Thanks @Tom W. & @Matt Panzer The issue with round closure is the radius . it is greater than the door/window distance from the outer edge of the wall. And thanks for clarifying the wall direction confusion. -
Ben Muir joined the community
-
Hi VW forum! My stage will be built on a platform. So I need to know the total weight of my stage. But when I try to do this by creating a report, I can`t get the results what I want. How can I create a weight report in a concise and accurate way? Thanks.
-
Pat: thanks for the reply. Any thoughts from Nemetschek tech staff ?
-
Kgettman joined the community
-
Hallo @MullinRJ Most are different.
-
Hello @SimA, Are all of your chords the same length or will they differ as you go down the line (um, curve?) Raymond
-
Several roof points - subdivision struggle
VIRTUALENVIRONS replied to MartinBlomberg's topic in Entertainment
Hi Martin, as I don't know exactly what you are working on, I hope this fits into your workflow. I have added a few things on the end that I thought might be useful to you. Experiment, good luck....Paul -
hi @mlohse, replied in a private message, but the short version would be, that my best guess from what you told me would be a translation error as described here:
-
Data visualisations in Equipment Summary Key
Scott C. Parker replied to Mike Wright's topic in Entertainment
Update 4.1 is out and offers the centering you're looking for. Once you update to the latest release, please test again and let us know how things go. You may need to update and/or rebuild your summary keys. We fixed an issue with them between updates 3 & 4. -
Worksheet menus don't work on external monitors
Pat Stanford replied to Wood's question in Troubleshooting
Worksheets not working on second monitor has already been reported as a bug. No way I know of to keep worksheet open for editing when you switch apps. Put a worksheet image on a layer and look at the image? -
-
Hi @Scott C. Parker 2024 Update 1 File attached! Data Vis Test.vwx
-
Hello everyone I plan and project kitchens, shop fittings, bakeries, counters and much more. Until recently, these were mostly cubic and angular. Organic forms are now often required. The furniture usually has fixed axis lengths or standard widths. "Point on Poly" works more or less well because the chord is too short because the length is calculated along the polyline. Now when it comes to execution, I have to determine the intersection points with circles. This procedure takes a lot of time because several drawings often have to be made. I have attached my file with the current marionette. This certainly explains it better than my Google translated one. Another thought: a curved line is always longer than a direct straight line connecting two points. I tried using a loop in the code to move the point on the line until it was at the intersection of the chord. The shifting was done, for example, in tenths of the difference between chord and nDist up to an accuracy of 0.000000x. The problem was that the point was calculated from the polyline starting point. However, I would need a continuous calculation from point A to B to C etc. Unfortunately, I failed because of my ignorance and GPT. Thank you for all your ideas! Kontur Aufteilung.vwx
-
Several roof points - subdivision struggle
MartinBlomberg replied to MartinBlomberg's topic in Entertainment
Thank you very much!! -
Several roof points - subdivision struggle
VIRTUALENVIRONS replied to MartinBlomberg's topic in Entertainment
HI Martin, I made this in a completely different, but easy way. Now that I see what you are after, I think you will like this method. Much greater, easier control and unlike subdivision, it remains NURBS. I have to go out for bit this afternoon, but will make a short video explaining the process later today. -
pietjepuk joined the community
-
Several roof points - subdivision struggle
MartinBlomberg replied to MartinBlomberg's topic in Entertainment
Yes exactly! Did you do the curved surface via loft btw? -
I've been playing around with the Photoshop AI Generative fill feature. It does exactly what you are asking for. It works great as it is non-destructive to your VW image. Simply select the area where you want something, describe it and hit enter.
-
Mixing sketch styles in viewports
Tom W. replied to samb'ham's question in Wishlist - Feature and Content Requests
You could also try assigning a 'wobbly' Line Type to your stone rubble Wall... (I know nothing about Sketch Styles) -
hey everybody, i‘ve tryed to get the connections between my devices via worksheet, but cant get it run… i got my schematic devices in via worksheet, that seems to work fine. bit i cant get any connections. i tryed with an excel sheet and followed the tutorial „signal flow and system design“ bit what worked there doesnt work in my file… next i had tryed with the make cable list command and change some sockets, didnt worked can anybody explain what i habe to do to prepare an worksheet? thanks a lot.