Helm Posted January 19, 2023 Share Posted January 19, 2023 Well my last one year free license will be expiring in a few months and with little work to do I am caught between a rock and a hard spot. I don't have enough work (I am well beyond retirement age) to justify the expense or the time to learn a new system. But I do have the occasional job or need to access an old one. Quote Link to comment
Dan Hoffman Posted February 8, 2023 Share Posted February 8, 2023 Just adding to the replies of extreme disappointment, as someone who spent a substantial sum, as a young designer over ten years ago, for a perpetual license and service select through the years - for updates that have added relatively little improvement to most of my workflow but were required because otherwise I couldn't easily exchange files with people using ANY other year of the software - and now all of that investment we've made in the software is essentially - ignored, gone?! 1 Quote Link to comment
Helm Posted February 8, 2023 Share Posted February 8, 2023 38 minutes ago, Dan Hoffman said: Just adding to the replies of extreme disappointment, as someone who spent a substantial sum, as a young designer over ten years ago, for a perpetual license and service select through the years - for updates that have added relatively little improvement to most of my workflow but were required because otherwise I couldn't easily exchange files with people using ANY other year of the software - and now all of that investment we've made in the software is essentially - ignored, gone?! All the complaints don't seem to be having an impact on the marketing department. I suppose they know what they are doing after all having started around the same time as ACAD they are number one in the market right -- Quote Link to comment
Dan Hoffman Posted February 8, 2023 Share Posted February 8, 2023 6 minutes ago, Helm said: All the complaints don't seem to be having an impact on the marketing department. I suppose they know what they are doing after all having started around the same time as ACAD they are number one in the market right -- Yeah, I guess this is mostly just venting, doubt that their marketing dept is going to change anything - but at this point basically everyone with whom I collaborate in Vectorworks has had the same experience and frustrations, and the only thing keeping us in VW-world is that it's what we're all used to using.... Quote Link to comment
Ramon PG Posted February 26, 2023 Share Posted February 26, 2023 And how exactly do you sell a license? I'm guessing you have to transfer ownership somehow so the new user sees his/her name in the splash screen, no? How? Who do I contact at NNA? Quote Link to comment
KevinF Posted June 17, 2023 Share Posted June 17, 2023 If I buy 2023 with Service Select, then do not renew, will I still be able to use the software? Quote Link to comment
Pat Stanford Posted June 17, 2023 Share Posted June 17, 2023 As far as I know, there is currently no way to purchase VW2023 with Service Select. As of January 1, the only way to get a new license is vis Subscription. If you buy a used license from someone with Service Select the Service Select license is not transferable. The license will continue to work, but will not be eligible for future upgrades. I don't know if that includes bug fixes or not. Quote Link to comment
KevinF Posted June 17, 2023 Share Posted June 17, 2023 (edited) 36 minutes ago, Pat Stanford said: As far as I know, there is currently no way to purchase VW2023 with Service Select. As of January 1, the only way to get a new license is vis Subscription. If you buy a used license from someone with Service Select the Service Select license is not transferable. The license will continue to work, but will not be eligible for future upgrades. I don't know if that includes bug fixes or not. If I do a 1-year subscription and then do not renew the next year it appears I can "Park the subscription". I lose the benefits of Service Select, but the software will continue to function at its last version. If I want to upgrade I will have to buy a new subscription. "4. Parking a License on your Contract If you no longer wish to upgrade a license every year you can park your license, which freezes it at its current version. You won’t have to pay for that license on your renewal each year; however, parked licenses and their assigned users are not entitled to the benefits of Vectorworks Service Select. Once parked, you will not be able to unpark a license or access the Service Select benefits (including access to the latest version) on a parked license in the future." Am I reading this right? Edit.... I see now that I am not reading this right. Looks like used is my only option. Edited June 17, 2023 by KevinF Quote Link to comment
Pat Stanford Posted June 17, 2023 Share Posted June 17, 2023 That is what the words seem to be saying, but that is not my understanding. Best option is to contract VW Sales directly and ask that specific question so you get the correct information. Quote Link to comment
Helm Posted June 18, 2023 Share Posted June 18, 2023 Yes contact sales. But what I understand is that you can't buy a perpetual license in the US but if you have one you can subscribe to service select. It seems if you park it you are stuck at where you left it. The only way is to buy a monthly or yearly subscription. And if you but a used license it is only good for the version you bought it can't be upgraded. Is that correct? If you are in the EU you can still buy a perpetual license until I think September. But the prices are very high. Quote Link to comment
shorter Posted June 18, 2023 Share Posted June 18, 2023 3 hours ago, Helm said: If you are in the EU you can still buy a perpetual license until I think September. Is this true? Of course the UK is stupidly not in the EU any more, but I thought the deadline for new perpetual licenses was 31 December 2023, and that Service Select is no longer available because it can only be purchased with a perpetual license unless you are currently a service select customer and looking forward to your renewal. Quote Link to comment
zoomer Posted June 18, 2023 Share Posted June 18, 2023 AFAIK Computerworks, vendor for germany, austria and switzerland did not yet made a decision or announced subscription only. But I am pretty sure it is just a matter of time until they follow subscription only at one point. I am bound to their decisions, although like some here I use the US version. I an not sure about how they deal with the non-localized version. Not sure if I could buy another used VW 2023 US license and still start a new VSS. Quote Link to comment
Helm Posted June 18, 2023 Share Posted June 18, 2023 1 hour ago, shorter said: Is this true? Of course the UK is stupidly not in the EU any more, but I thought the deadline for new perpetual licenses was 31 December 2023, and that Service Select is no longer available because it can only be purchased with a perpetual license unless you are currently a service select customer and looking forward to your renewal. You are probably right about the deadline I was just quoting from my poor memory. I have gotten a quote from the Italian vendor so I know it is possible. Also it is available in Spain and I think both have English versions. Quote Link to comment
shorter Posted August 7, 2023 Share Posted August 7, 2023 (edited) Hello @JuanP Could you please clarify/confirm, for all those selling and buying, if the Transfer Fee levied in the UK, is still applicable, and also how much it is and who should pay it? It was £150 + vat, and was collected by Vectorworks. We would normally recommend the buyer pays the transfer fee as they are then certain that it has been paid and the license is officially theirs. Also, if a UK license is sold to someone in the US or AUS does the situation change? Some clarification would be useful as I have just been asked if the transfer fee is still applicable. Thanks. Edited August 7, 2023 by shorter Quote Link to comment
KJ_KJ Posted November 30, 2023 Share Posted November 30, 2023 Hello from Sweden My VW Arch is very outdated and seems not to be able to run on Win10/11 (at least the dongle does not...). Which is a pity since I like it, it works smoothly and it meets all the requirement for me and my type of projects/clients. So I am in a pickle.... 1 - If I would want to buy, second hand, a perpetual license to a newer version of VW Arch; can I buy it from any user in any part of the world and still have it valid and functional in Sweden or must it be bought from someone in Sweden/EU? 2 - How new of a version do I need to have it working whithout trouble on Win11 ? /KJ Quote Link to comment
osterman Posted December 18, 2023 Share Posted December 18, 2023 (edited) Hello, Can anyone speak to the relative supply and demand for 2022 perpetual licenses? I'm trying to make some decisions based on the viability of finding one for purchase within a reasonable time frame, as well as the cost. Thank you. gary osterman berkeley, ca 94710 osterman@comcast.net Edited December 18, 2023 by osterman Quote Link to comment
Juay Posted November 15, 2024 Share Posted November 15, 2024 On 9/17/2022 at 2:09 AM, JuanP said: Starting January 1, 2023, monthly and annual subscriptions will be the only purchasing option for licenses of Vectorworks in the US, UK, Australia, and Canada. December 30, 2022 will be the last day to purchase perpetual licenses or new Service Select agreements in these markets. For all other markets, this change will go into effect by January 1, 2025; please reach out to your local Vectorworks distributor to learn more about the timeline in your market. This means that after January 1, 2023, any perpetual licenses sold or bought between end users will not be eligible for upgrade and will not be able to be added to a Service Select contract. If you choose to buy an older version of Vectorworks from another user, the license is yours and will continue to work as long as you have a compatible operating system, but can’t be transferred into your existing Service Select agreement and you will not be able to assume or transfer their agreement. If you are buying or selling a license with another user, you can reach out to the Vectorworks customer service team at customerservice@vectorworks.net and we will provide a Transfer of Ownership Form which will notify us of the new owner of the license for our records and to provide technical support if the license is still within its support window. If you own any perpetual licenses without a Service Select agreement in place, you should consider adding a Service Select agreement before the end of 2022. Without the Service Select agreement, you will not be eligible for enhanced benefits, including access to the latest versions when they become available. Hi Juan, Is there any restriction for the purchase for the 1st Jan 2025 timeline regarding perpetual license and VSS currently for personal use? I am based in Singapore Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.