Brooklyn Posted December 10, 2016 Share Posted December 10, 2016 I've drawn plans and some lines and structures lie flat and can be seen in oblique views of the plan, and others remain in plan view. See image. How can I put all the lines into the oblique capable view so I can build a 3D model on them? Quote Link to comment
markdd Posted December 10, 2016 Share Posted December 10, 2016 (edited) Its in the View menu. Under Align Layer Views. There is an option to show Screen objects in active layer. You will need to uncheck that. You should probably investigate further screen and layer plane objects and the differences between them. Hope that helps Edited December 10, 2016 by markdd Quote Link to comment
AlanW Posted December 10, 2016 Share Posted December 10, 2016 (edited) @BrooklynHi if some are on screen plane and some on layer plane there is a script by By Petri Sakkinen 2010 that changes them all instantly, its a Plug-in . Attached is the Zip file for Mac and PC. Read the instructions in the Documentation PDF. Pretty simple and works a treat. HTH PlaneMode (1).zip Edited December 10, 2016 by Alan Woodwell Quote Link to comment
MullinRJ Posted December 11, 2016 Share Posted December 11, 2016 Brooklyn, It's even easier than running a script. Select All, then in the OIP, under the Plane menu (which should be blank because you have objects selected on multiple planes), select "Layer Plane". Now all your objects will be moved to the Layer Plane. Next, go to the Active Plane menu at the top of the drawing window and select "Layer Plane". Everything you draw will now be drawn on the Layer Plane. HTH, Raymond Quote Link to comment
zoomer Posted December 11, 2016 Share Posted December 11, 2016 And don't forget that a similar Appearance happens (when using more than 1 Layer) and "Unified View" Option is OFF: Quote Link to comment
HEengineering Posted December 13, 2016 Share Posted December 13, 2016 On December 10, 2016 at 5:53 AM, Alan Woodwell said: @BrooklynHi if some are on screen plane and some on layer plane there is a script by By Petri Sakkinen 2010 that changes them all instantly, its a Plug-in . Attached is the Zip file for Mac and PC. Read the instructions in the Documentation PDF. Pretty simple and works a treat. HTH PlaneMode (1).zip I have maybe a similar script, not sure its the same. Can you confirm this works in 16/17 Alan? Quote Link to comment
AlanW Posted December 13, 2016 Share Posted December 13, 2016 Yes works 2016 &2017 I have it as part of a menu on top bar and one click change all. Offensive get drawing with a mix to work on Andy this works a treat. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.