Spark155 Posted February 16, 2023 Share Posted February 16, 2023 I am trying to model a theatre space that has a sloping ceiling in 2 directions there is approximately a 25 degree fall back to front and a 20 degree fall from left to right I have tried with ceiling grids and roof faces but cannot seem to make this work. Is this possible if so what am I missing? Thanks Mark Quote Link to comment
Kevin Allen Posted February 16, 2023 Share Posted February 16, 2023 won't a simple 3D object work? Then auto Hybrid or add a 2D component 2 Quote Link to comment
cberg Posted February 16, 2023 Share Posted February 16, 2023 (edited) You can do it with a roof face. (Although some math is involved). Figure out what the pitch is along the diagonal. Make the plane of the roof perpendicular to the diagonal. Slope 2 Directions.vwx Edited February 16, 2023 by cberg Edited to include file 4 Quote Link to comment
Popular Post line-weight Posted February 16, 2023 Popular Post Share Posted February 16, 2023 Taper face command is often useful for this kind of thing (NB the second taper face operation, where I just type in 25 degrees, in reality you might have to create a guide line to snap to, to get the 25 degrees from the true vertical). Screen Recording 2023-02-16 at 18.44.22.mov 6 Quote Link to comment
Tobias Kern Posted February 17, 2023 Share Posted February 17, 2023 Hi, using a Hardscape should also do the job, or a Subdivision. Greetings from Germany Tobi Quote Link to comment
Popular Post Tom W. Posted February 17, 2023 Popular Post Share Posted February 17, 2023 Another take on the 3D solid approach: Screen Recording 2023-02-17 at 11.37.59.mov I would only use a Roof Face, Hardscape, Slab, etc if this was an architectural job + you needed to show the construction/components + you were going to benefit in other ways from using a parametric object. 5 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.