Jump to content

Nikolay Zhelyazkov

Vectorworks, Inc Employee
 View Profile  See their activity

  • Posts

    1,921

  • Joined

  • Last visited

 Content Type 

Everything posted by Nikolay Zhelyazkov

  1. Nikolay Zhelyazkov
    Hello @Matthias Ganninger, I think that there is already a bug about that. Is this happening in VW2020 only? Best Regards, Nikolay Zhelyazkov
  2. Nikolay Zhelyazkov
    - Plot Data Format is in Title Block Border Settings dialog, Sheet Data Pane, Current Plot Date field has the Plot Date Format popup - select one of the Auto options there - Then, go to File->Publish, Select the Sheet Layer with the TBB for publishing by moving in on the right side of the list with PDF checked in the popup below the left list. Then, select the PDF items on the right list and click on Options... button, which will give you the Export PDF options dialog. In this dialog you have a checkbox for Reset All Plugins on export. You should check this checkbox. If these steps are not clear, I could make a screen recording showing you the steps. Best Regards, Nikolay Zhelyazkov
  3. Nikolay Zhelyazkov
    Hello @drelARCH, Sure, send me a file and I will check it out. Best Regards, Nikolay Zhelyazkov
  4. Nikolay Zhelyazkov
    Hello @martinfdc, We are working on a fix for this. Could you remind me in here about this when VW 2020 is released? Then I will be able to give you some more detailed information. Best Regards, Nikolay Zhelyazkov
  5. Nikolay Zhelyazkov
    Hello @jarjones, Could you send me a test file? Best Regards, Nikolay Zhelyazkov
  6. Nikolay Zhelyazkov
    Hello @FBernardo, Make sure that in Page Setup you have set your page to be One Printer Page sized. Let me know if this helps. Best Regards, Nikolay Zhelyazkov
  7. Nikolay Zhelyazkov
    Hello @Mickey, This should be fixed in VW 2019. If you are seeing the problem there, could you send me a test file? Thanks, Nikolay Zhelyazkov
  8. Nikolay Zhelyazkov
    Hello @Kevin Allen, The problem in your file is that there are many wall peaks created and they cannot be visualized. You could remove your peaks and fit walls again with greater curved wall fit interval (for me it worked with 5'). Best Regards, Nikolay Zhelyazkov
  9. Nikolay Zhelyazkov
    I am happy to help 🙂
  10. Nikolay Zhelyazkov
    @twhitwell6, Do you have Auto Drawing Coordination checked in Document Settings? If so, could you send me a test file to see what is going on wrong? The TBBs should update when the sheet is renamed.
  11. Nikolay Zhelyazkov
    Unfortunately, I do not think that this is possible for now, if you want to make batch rename of sheets. Maybe the fastest way will be to use the Organization Dialog.
  12. Nikolay Zhelyazkov
    Hello @twhitwell6, The Sheet List report is only listing the Sheets you have. You cannot edit your sheets from it, as it is not using Database rows that allow this. Best Regards, Nikolay Zhelyazkov
  13. Nikolay Zhelyazkov
    Raising the roof should be ok too I think.
  14. Nikolay Zhelyazkov
    It seems like your side walls that are directly under the roof are still above it and that is why the fitting is failing. -500 offset fixes it, maybe less than that could work too. Make sure you do not have walls that are above the objects that you are top fitting to, so that your fit does not fail.
  15. Nikolay Zhelyazkov
    @jwseas Did you move your walls a bit lower? I think that setting a bottom offset of -100 should get the job done. If not, simply select the wall, Modify->Move 3D->move by -100 Z.
  16. Nikolay Zhelyazkov
    @jwseas I think I found what is going on wrong. The bottom of your wall is intersecting your roof and that is why the roof is not counted as valid for fitting. You could move your wall a bit lower (it worked for me with -100 with Move 3D by Z). I have used Top Boun of Layer Wall Height. Let me know if this fixes your problem. Best Regards, Nikolay Zhelyazkov
  17. Nikolay Zhelyazkov
    Hello @jwseas, You could try uploading your file to dropbox and sending a link here or maybe try sending the file to me via PM so that I could look into it? Best Regards, Nikolay Zhelyazkov
  18. Nikolay Zhelyazkov
    Hello @_James, I have looked into this for some time. I have noticed that you have a field in Sheet Data that has empty name, which is causing the naming schemes to be messed up (I think I did not see this before). Could you try deleting this field and then printing and tell me if you still have problems? Best Regards, Nikolay Zhelyazkov
  19. Nikolay Zhelyazkov
    Hello all, We have received other reports about that and we are looking into it, but we do not have the certain steps to reproduce it. Does anyone have steps that reproduce this 100% of the time? Also, is this happening with other objects too or only TBB? Best Regards, Nikolay Zhelyazkov
  20. Nikolay Zhelyazkov
    I am happy to hear everything is fine. 🙂
  21. Nikolay Zhelyazkov
    If you get the same result when printing the pdf outside of VectorWorks, then probably the problem is in your printer.
  22. Nikolay Zhelyazkov
    Now I have noticed that the margins in the file you sent me are not the same as these in the picture from your comments, but are bigger on the left and right. Here is the result that I get when I export to pdf: test.pdf Did you try resetting your page size from Page Setup, but not from the print dialog, from File->Page Setup?
  23. Nikolay Zhelyazkov
    - Yes, but it includes the margins that you have set. You could edit the Title Block Border style and make it have wider right margin. This might compensate the issue for a workaround. However, I am not sure what could be causing your issue.
  24. Nikolay Zhelyazkov
    I am able to print correctly here, using A4 printer size. Before printing, try opening File->Page Setup and from there select your printer, printer size and make sure that the page is using One Printer Page size. If this does not fix your problem, you could first export to PDF and then try to print the pdf. Let me know about the result. 🙂
  25. Nikolay Zhelyazkov
    Yes, you could get a shareble link of the uploaded file from dropbox.
×
×
  • Create New...