Vectorworks drafter Shiv Posted March 15 Share Posted March 15 (edited) Hi There, We are working on a factory Project which was Point cloud to 3D model 350 LOD client requirement specific hatch on wall in sheet but GETTING WRONG HATCH PATTERN AND MY CLIENT REQUIRED specific hatch AS I GENERATED IN HATCH EDIT Here I am attached Vectorworks File also Please Help on it. Here Wall Hatch.vwx Edited March 15 by Vectorworks drafter Shiv Quote Link to comment
Jeff Prince Posted March 15 Share Posted March 15 (edited) Your hatch is not built correctly, there are errors in its design. Edited March 15 by Jeff Prince Quote Link to comment
Andy Broomell Posted March 15 Share Posted March 15 As Jeff says, the math must not be quite right. In cases like this, the hatch tends to look okay near the 'origin' but then progressively more misaligned as you move farther away: 1 Quote Link to comment
Andy Broomell Posted March 15 Share Posted March 15 If it were me I'd abandon the Hatch, and instead make a Tile fill because those are way easier to create. Unfortunately Tile fills can't be added as "Surface Hatches" so I'd instead overlay it as needed in viewport Annotations. Quote Link to comment
Vectorworks, Inc Employee Matt Panzer Posted March 16 Vectorworks, Inc Employee Share Posted March 16 Set the document unit precision much higher than 1 decimal place then edit the hatch and you’ll see the offsets are not what you think due to them being rounded to the document unit precision. That is what’s causing the problem. Once you’ve corrected them, you can change the precision back as needed. BTW, I believe the hatch offsets can be corrected without changing the precision by selecting each one and retyping it in. This will replace the actual values (that are displayed rounded) with the correct value. It’s a little weird doing it this way because the value you’re replacing looks the same (do to the rounding) as the new value. 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.