Christiaan Posted July 8, 2012 Share Posted July 8, 2012 Is it possible to offset wall components adjacent to WinDoor objects, like you can with the built-in window object? (e.g. I want to pull the external insulation in front of the window frame) Quote Link to comment
Christiaan Posted July 14, 2012 Author Share Posted July 14, 2012 I'm right in saying you can only do this with the built in VW window object right? i.e. with the insulation pulled in front of the window frame. Quote Link to comment
gester Posted August 8, 2012 Share Posted August 8, 2012 i should admittedly sacrifice more hours to learn nuances of vw, but let me ask a dumb question: where is this built in window object? i try to desperately figure out how such 2d window representation as on above drawing can be done... rob Quote Link to comment
taoist Posted August 9, 2012 Share Posted August 9, 2012 (edited) gester, Go to the Settings in OIP. External Wall Detail. Set it to 1 See attached images. Edited August 9, 2012 by taoist Quote Link to comment
taoist Posted August 9, 2012 Share Posted August 9, 2012 gester, Here is a screen shot from the help file. Quote Link to comment
gester Posted August 9, 2012 Share Posted August 9, 2012 thank you very much. i'll check if i can follow the information. rob Quote Link to comment
taoist Posted August 9, 2012 Share Posted August 9, 2012 gester, when you click on the insertion point you drag the point to the size you need. There is one point for the opening, not a point for each end (sides) of the opening. You will notice what is happening as you drag the insertion point. Quote Link to comment
gester Posted August 26, 2012 Share Posted August 26, 2012 yeah, the manipulation of the insertion point does the trick. thanks. rob Quote Link to comment
gester Posted November 12, 2012 Share Posted November 12, 2012 how can i have the overlapping insulation part from above operations visible as a renderable solid in a side view/perspectives? all i see in any rendering is the window with its outline, the overlapped insulation part is transparent in 3d and renderings (practically non-existent), turning the architectural opening into a rough opening. is there any setting for this? rob Quote Link to comment
gester Posted November 16, 2012 Share Posted November 16, 2012 (edited) to better illustrate the case: 1. the rendered wall with the window 2. wireframe appearance 3. the floor plan with a wall component overlapping the window frame. the overlapping simply doesn't display in the renderings. does anybody know how to turn it on? rob p.s. btw: how can i move the marker away from the window? -> edit: ok, i got it - what have i the handle for? Edited November 17, 2012 by gester Quote Link to comment
gester Posted November 26, 2012 Share Posted November 26, 2012 anyone? or do i have to model the missing insulation stripes into the window opening? in this case what is the window-in-wall component handling for (apart from the 2d plan view)? rob Quote Link to comment
Christiaan Posted November 27, 2012 Author Share Posted November 27, 2012 They don't exist in 3D as far as I know. Don't know why. Ran out of time before release? Quote Link to comment
VincentCuclair Posted November 27, 2012 Share Posted November 27, 2012 I think I solved that once by drafting them in 3D and then grouping the window and the 3D insulation, that way everything moves if you move the window. Quote Link to comment
gester Posted November 27, 2012 Share Posted November 27, 2012 jeeez... i was always told: a job half done is not done at all. @vincent yes, it is a workaround. and also for the sections and 3d. rob Quote Link to comment
mike m oz Posted November 27, 2012 Share Posted November 27, 2012 The ability to wrap Wall components is part of the coding of the NV Door and Window tools. It is not available outside of those tools which is why Windoor can't do it. With the NV Door and Window tools the Wall Component wrapping only works in Plan view so can only be applied to the jambs of the openings. You can't wrap components at the head and sill of openings. Quote Link to comment
gester Posted November 27, 2012 Share Posted November 27, 2012 mike, it's a kinda drift in this thread, i don't have windoor, i use native vw window tool... rob Quote Link to comment
VincentCuclair Posted November 28, 2012 Share Posted November 28, 2012 Mike this thread has actually become about the native tool, Roberts hash is the fact that they don't appear in 3D view though they are present in 2D...... Quote Link to comment
gester Posted September 16, 2013 Share Posted September 16, 2013 referring to my post #179791: has this issue been addressed in the v2013? i mean: are the extended external wall components visible in the elevation views now? thx. rob Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.