edp Posted May 26, 2009 Share Posted May 26, 2009 I have VectorWorks 2008. Somehow I have lost my grid. How can I return the grid to the workspace? Quote Link to comment
michaelk Posted May 26, 2009 Share Posted May 26, 2009 The reference grid can be turned on and off by double clicking the Snap to Grid button, or double hitting the "A" key. Or Tools>Set Grid... hth michaelk Quote Link to comment
Jonathan Pickup Posted May 26, 2009 Share Posted May 26, 2009 if you set a small reference grid, it can disappear when you zoom out. I use 1000mm for my reference grid (3' for imperial). Quote Link to comment
islandmon Posted May 26, 2009 Share Posted May 26, 2009 Our grids are set to match the project nominal spacing requirements based on the Page Scale ratio, ie 1:10, 1:20 ... or some whole increment within these bounds. Quote Link to comment
Jonathan Pickup Posted May 26, 2009 Share Posted May 26, 2009 I always use the same reference grid, so I don't have to remember different settings. I hardly ever use the snap to grid constraint. Quote Link to comment
VWUser2335 Posted May 29, 2009 Share Posted May 29, 2009 You can check your grid settings in: File > Document Settings > Document Setup... Drawing grids Your snap and reference grids can be turned on or off here. Quote Link to comment
edp Posted June 3, 2009 Author Share Posted June 3, 2009 Thanks. Double hitting the A key worked. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.