Jump to content

A McDonell

Member
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

 Content Type 

Posts posted by A McDonell

    Roof Edge Condition

    in Architecture

    Posted

    @CipesDesign Thanks for taking the time to share your workflow! I still like the 2d/3d hybridity and BIMyness of the roof tool, as weird, glitchy and short of features like gutters and fascias it is, it still saves time especially for more complex roof forms. 

    Roof Edge Condition

    in Architecture

    Posted

    Im sure that i'm missing something obvious here... but is there a way to make the top edge condition of this roof plane finish square (perpendicular to the roof face) rather than vertical, the same as the lower edge?

    Cheers,

    Andy

    image.thumb.png.95266afb731dc5aa0b41d480f2e782d5.png

    Roof Edge Condition

    in Architecture

    Posted

    Im sure that i'm missing something obvious here... but is there a way to make the top edge condition of this roof plane finish square (perpendicular to the roof face) rather than vertical, the same as the lower edge?

    Cheers,

    Andy

    image.thumb.png.af454d8293124e4b1dfcac7e6fdcd867.png

    stair tool 2020?

    in Architecture

    Posted

    Ive always found the custom stair tool workable for most applications... until today when it went nuts, started renaming its self in oip, oip sometime blank, unable to bring up settings etc... anyone else with a quick fix to this ? deadlines loom as always

    ENERGOS 2020

    in Energos

    Posted

    On 4/22/2020 at 11:16 PM, Luka Stefanovic said:

    You can exclude individual Spaces by unticking Use in Edit Spaces List. This will update the Total Relevant Floor Area

    this then changes the glazing to floor and exterior wall/ roof slab/ Sqm to occupied volume ratios... making the result inaccurate. Changes of surface area to volume have the biggest effect on the Energos results from my experience.  

     

    What I need to get close to an accurate result is a way to change the climate controlled space calculations, effecting the heating/cooling demand calculations made by Energos. BUT maintain the the building envelope to relevant floor area to keep the passive heating and cooling calculations accurate. 

     

    For example in my school building only half the relevant floor area is actively climate controlled by the building services. Circulation spaces, storage spaces, toilets etc. are not controlled. Therefore the heating demand results are not reflecting the actual demand (as audited).

     

    By giving Spaces Energos controls... for instance checkboxes for whether they should be actively included in building services calculations, a target ambient cooling and heating temperature etc... it would become instantly more powerful... for instance enrgos data for a single space could be called out and then iteratively worked on. dat visualisation could tell us the weak points in a design etc.... the resolution of the tool would go through the roof.  

    • Like 2

    ENERGOS 2020

    in Energos

    Posted

    I want some space by space energy demand control- for instance the boiler  to not be heating some circulation and storage spaces... how would  i achieve this?

     

    Cheers

    Andy

    ENERGOS 2020

    in Energos

    Posted

    hey  @Nikolay Zhelyazkov , im pretty time constrained at the moment but i took some time to trial an error with ernegos... results below 

    On 4/7/2020 at 4:20 PM, Nikolay Zhelyazkov said:

    Hello @A McDonell,

     

    I am not that much in the terminology but I will try to answer your questions.

     

    1. There is not such update planned for energos for now, could you add a wishlist item for it in the wishlist forum?
    2. No, the airtightness data is manually entered.
    3. Yes, the drawing should be accurate
    4. I think that the change of the boiler settings should update the results. Do you have a test file to send me?
    5. Not really sure about this one, maybe try using termal bridges?
    6. You can play around with the label settings to adjust it to have a layout that suits you. If you prefer to have more numerical data, you can create a worksheet report from that label that has titles, calculations, etc.
    7. I will need a test file and steps to reproduce this one too.
    8. Worksheet report of the label should make this possible.

     

    I hope these answers help you. 🙂

     

    Best Regards,

    Nikolay Zhelyazkov

    1. maybe next weekend
    2. Idea....should be controlled by the space objects (as well as heating and cooling requirements etc...) this would make the final info much more accurate
    3. Wrong, kind of, the drawing doesn't have to be accurate....

    Roof object- no change when disconnected from walls (floating above)

    Space object - no change if the space object doest touch walls, or is smaller than the slab size, DOES change results if the area is bigger than the slab (ie outside the walls)

    Slab object- DOES alter results if the slab is more than 10mm lower than base of walls(or space object z value), DOESNT if its 10mm or less lower than walls(or space object z value)

    Window object- doesnt alter 

    Wall objects- lack of resolved connection to each other doesn't effect results, lack of connection to floor slab or space z value does, lack of connection to 

    4.  another time
    5. thanks, thats working well

    IDEA... it would be great if energos had a function to show us any objects that are thermal bridging (eg structural members for instance, or component to component connections badly organised.
    6. Not really (are you talking about the 3 graphic options?), some self generated headings would be a good start to improve this.
    7. another time
    8. to time consuming, and multiple energos label tools in one viewport seems to make VW lock up and die, i have deleted them all from my document, took about an hour because VW was wigging out as usual, ill just screen grab the info until the soft engineers can make it work properly.

    IDEA... maybe VW should supply some energos reports preprogrammed for their service select members, something with ALL or MOST the info gathered, which we can then just edit as needed.

     

     

    Thanks for your time though, i can see your dedication and patience above

    Cheers,

    Andy

     

     

     

     

     

    Space Tool Improvments

    in Wishlist - Feature and Content Requests

    Posted

    @_James

    Ive also had fantastic experiences with the distributers in Australia. Their service is the biggest factor stopping me from jumping ship to another set of software. The old user folder rename trick, works for a while then problems return, seems an absurd work around given the length of time that users have been complaining of space tools issues, and how integral a tool it is to so many parts of the software (Worksheets, Energos etc...)

    ENERGOS 2020

    in Energos

    Posted

    @Nikolay Zhelyazkov. Thankyou for your response.

    I was asking more generally because my trawling through these forums and the various VW materials revealed a conspicuous silence around Energos. Before I invested to much time in learning the tool I wanted to get some feedback as to how buggy/ accurate/ usable it is. I have had bad experiences in the past (site model etc...). Heres are some initial questions arising from my first few hours of exploration...

     

    1. Any timeline for when Energos will be able to account for shading in an automated way, based on modelled objects and their relationship between the sun the building. This would bring the tool closer to the iterative power of lady bug in rhino for example

    2. does the climate data base gathered via heliodon provide wind data? is this accounted fro through the "screening" calcs in "air tightness"

    3. do in accuracies in drawing, such as a wall not perfectly connecting to a roof, effect the modelling?

    4. When i change my many significant settings, such as boiler settings (my sole heat source in a large building, with predominantly heating demand requirements) there is no change in the various outputs after update.

    5. What is the best way to model the air exchange driven performance between an entry way with or without an airlock?

    6. Why does the label tool not display a title text of some kind according to its basic oip setting "result value". Then it might actually be a useful data vis tool to decribe to client where various options are working or not.

    8. Is there a way to extract the data listed at the bottom of the oip of an Energos Label? (even Copy and Paste would be fine)

    7. Is anyone else experiencing the label tool locking up VW every so often?

     

    ...more to come i'm sure

    • Like 1

    ENERGOS 2020

    in Energos

    Posted

    VW 2020, Energos, does it work? Is anyone using professionally? 

     

    Given the historic lack of information or responses to questions coming from VW inc.... Is there an employee out there in 2020 willing to talk about the status of this module with any specificity? or is it another half finished Vectorworks tool?

    ENERGOS

    in Energos

    Posted

    VW 2020, Energos, does it work? Is anyone using professionally? 

     

    Given the historic lack of information or responses to questions coming from VW inc.... Is there an employee out there in 2020 willing to talk about the status of this module with any specificity? or is it another half finished Vectorworks tool?

    Your system has run out of application memory

    in Troubleshooting

    Posted

    @JuanP I to am getting memory leak issues constantly in all files. Lots of crashes unless i check my "activity monitor" every 30 minutes, and restart VW when it reaches 40-50GB.  Screen shot below, is the status after open VW and performing 3 viewport updates- no model or line work changes... If there is a fix for this VW should release asap, not according to a predefined schedule. You are transferring to much time/money cost to your consumers business's.

    1152328023_ScreenShot2019-11-20at10_24_19am.thumb.png.0e926a4bf77ee72137526004115e1e92.png

    ... aaaannnddd super slow performance on hidden line renders. I mention it here because other threads regarding the lack of performance for hidden line renders seem to get no love or attention from VW experts. If Open GL can do it (crop hidden lines in real time) why does it take a view port 20 minute to render a hidden line (sans intersecting lines&surface hatches, 150 page dpi)

    • Like 2
×
×
  • Create New...