jeremyb Posted September 22, 2014 Share Posted September 22, 2014 I want to print a drawing with a reference grid visible as this will help in further survey work. The only way that I have found to do this is to enlarge the snap grid and check to option to print this grid, print, then to go back to change the snap grid size and de-select the print option. There does not seem to be an option to print the reference grid - is this right? Quote Link to comment
J. Wallace Posted September 22, 2014 Share Posted September 22, 2014 Hi Jeremy You should find that setting here under File > document settings> document setup.... Quote Link to comment
bcd Posted September 22, 2014 Share Posted September 22, 2014 Toolset: Dim/Notes>Scroll down to the bottom>Rectangular Grid or if using Architect/Landmark Toolsets: Dim/Notes>Grid Bubble Quote Link to comment
Christian Fekete Posted September 28, 2016 Share Posted September 28, 2016 You have to double click on the grid icon of the snapping palette and select "print grid" good luck Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.