JP Architect/Build Posted May 27, 2010 Share Posted May 27, 2010 I have a small house addition model that I can not get to show up in Active Layer Plane when I use Open GL. Most of the model is greyed out, except for a wall or two. All Design Layers are set to visible. Layer Option is set to Show /Snap Others. Also I cannot rotate the model without jerky-ness and the whole thing disappearing at times. I assume it has to do w/ "the Screen Plane", it won't allow me to switch back to Active.... unless I go back to Top/Plan view. Other house models work just fine in other files. I guess there is something simple I'm missing. Any thoughts? Quote Link to comment
bcd Posted May 27, 2010 Share Posted May 27, 2010 A couple of ideas to try: Is View>Class Options>View Snap Modify Others enabled? 2d objects have the flexibility of residing on either the Active Layer Plane or the Screen Plane. 3d objects however live in 3d space often with a Bottom Z value defining their elevation above zero. Are your Design Layers at the same scale? Have you enabled Stack Layers? Jerkiness sounds like your computer is working too hard -if the above doesn't help try reducing the quality via the View>Rendering>Open GL Options settings to see if this helps (& or disconnecting your 2nd screen as an experiment - or try after restarting VW) Quote Link to comment
Danielj1 Posted May 27, 2010 Share Posted May 27, 2010 (edited) It would be helpful if you could post a picture or a file. As BCD suggests, it's unlikely the problem is connected to active or screen plane issues, but it is a bit hard to identify possibilities in the absence of more info. Dan J. ps: incidentally, in Architect2010 Stacked Layers have morphed into Unified View, and as BCD suggests, this may well be a clue. Edited May 27, 2010 by Danielj1 Quote Link to comment
JP Architect/Build Posted May 27, 2010 Author Share Posted May 27, 2010 How do I send a JPEG picture, or another format on this board? Quote Link to comment
Jonathan Pickup Posted May 27, 2010 Share Posted May 27, 2010 switch to Full Reply Screen, then use the File Manager to add files. Quote Link to comment
JP Architect/Build Posted May 28, 2010 Author Share Posted May 28, 2010 Open GL iso ghosted JPEG file attached. All layers are set to visible, yet most are ghosted. Set to show /snap others. How do i get all visible? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.