bonus Posted October 8, 2008 Share Posted October 8, 2008 I need to work in a rotated plan mode. When I rotate the plan all text follows the rest of the drawing, but text made with the space tool (room #, area etc) does not rotate. "adjust flipped text" is on. Any idea how to solve this problem? 1 Quote Link to comment
M.CH Posted October 8, 2008 Share Posted October 8, 2008 In the Object Info Palette of the Space Object press the "Settings" button, and there you can enter the angle of rotation. Whatever you have rotated your plan by enter this figure as a negative amount to get your text horizontal. HTH Quote Link to comment
bonus Posted October 9, 2008 Author Share Posted October 9, 2008 (edited) I have tried that. The text box just jumps away to another location without rotating a bit. I also tried making new space notations in the rotated model. Then the text show up rotadet by default like the old ones and can't be adjusted either. Edited October 9, 2008 by bonus Quote Link to comment
bonus Posted October 9, 2008 Author Share Posted October 9, 2008 ......M.CH Not giving up is the key to success! The rotation angle box on top got all my attention.....and I never realized, 'til now, that there is a separate box for the text rotation. Thanks! Is there a Montreux in the UK? Quote Link to comment
Jeffrey W Ouellette Posted October 10, 2008 Share Posted October 10, 2008 Anders, Are you sure you want to change the text rotation angle while in rotated plan mode? What everyone needs to understand is that the rotated plan mode is NOT meant to be an "AutoCAD-like" UCS system. It was meant to be a temporary VIEW rotation mechanism to facilitate drafting/modeling at multiple, non-orthogonal angles. The user should ultimately always return to the absolute, or 0 degree, view. Quote Link to comment
M.CH Posted October 10, 2008 Share Posted October 10, 2008 Is there a Montreux in the UK? Not as far as I know, I currently have a glimpse of Lake Geneva, AKA Lac Leman Quote Link to comment
bonus Posted October 10, 2008 Author Share Posted October 10, 2008 Right Jeffrey, That's how I meant to use it. The problem I had is that the text did not rotate when I rotated the working plane but when I rotated the plane back the text did rotate as well. The result of this was that the text in the non rotated plan view was rotated - and I had to find a way back from there. "Undo" action did not help. On the other hand, what's the reason all text rotates, except for the space tool text? Then again, it seems to rotate randomly. Randomly also seems to be the key word in my version of 2009. Whatever I do these days ends up with some trouble.... Quote Link to comment
bonus Posted October 10, 2008 Author Share Posted October 10, 2008 Quelle merveille M.CH!....keep on glimpsing! Quote Link to comment
Pat Stanford Posted October 10, 2008 Share Posted October 10, 2008 I just tried it on VW2009 here and if I have space objects and I rotate the plan, the text of the space objects rotates with the plan. If you create a space object while rotated, it comes in at the same "apparent" angle as that of spaces made without the view being rotated. With all the problems you are having, I wonder if you should delete VW and start with a new clean install of 2009 and see if that helps. Pat Quote Link to comment
bonus Posted October 12, 2008 Author Share Posted October 12, 2008 Hi Pat Now I'm as upgraded I can be, except for the computer itself. VW 2009, 4.5Gb RAM and latest macOS10.5.4. In a blank document the space tool works fine, rotates as a merry-go-round. So basicly it seems to be ok. Maybe my problems arouse because I originally drew the plan in an upright position, then rotated it to fit the site map and as a third step rotated the working plane back to upright to be able to work on it. The space notations were already made before this. In a way it is logical, but rotating all design layers simultaneiously should not leave some text unrotated anyway....or maybe it should...I'm a bit confused right now by all this spinning around. Beeing upgraded and reinstalled, I quickly checked my window in wall problems and there's still no change there. As for the class assignment problems - no change either. Still just one door at a time... ...really, really frustrating! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.