Convert auto Hybrid to 3d symbol

[Ben3B]

Hello is a way to convert auto hybrid to 3d symbol 

Because editing auto hybrid isn't simple, and converting a 3d symbol to hybrid is very simple via editing 2d , right click generate 2d from 3d...

 

Thanks!

[markdd]

Auto Hybrids can be Ungrouped. This means that depending on the view you want to keep you can either run the Ungroup command on the Top/Plan view or a 3D view and you will be left with the geometry as it was before you converted it into an autoHybrid object.

 

Then make a 3D Symbol in the usual way and add the Top Component as you describe above.

[AlanW]

@ben59

Hi what do you have a problem with editing an autoHybrid?

I simply double click on the autoHybrid and i am in and looking at the original objects with out the auto hybrid operations. then i come out when done.

Auto.vwx Auto_v2021.vwx

Edited September 20, 2022 by AlanW

[Ben3B]

@AlanW My problem is, with auto hybrid I only can rotate it on layer plan ...autohybrid pb.vwx

But the @markddmethods works 🙂

 

 

Edited September 20, 2022 by Ben59

[AlanW]

@Ben59Hi, I find if i go into Hybrid i can rotate it using the automatic plane option to any angle i want.

 

[AlanW]

@ben59 Hi again,

If i go into the symbol then go into the autohybrid i can rotate it with auto. Tricky one>

HTH

autohybrid pb (3).vwx

[Ben3B]

Ohh So I'm certainly wrong somewhere ... because I can't rotate it2022-09-26 12-23-16.mkv