elc Posted March 1, 2022 Share Posted March 1, 2022 (edited) Would it be a big issue to add the option for 0.5U units to the drop-down of the equipment height as I can't manually change the rack frame height? Best, George Edited March 1, 2022 by elc Quote Link to comment
Vectorworks, Inc Employee Conrad Preen Posted March 3, 2022 Vectorworks, Inc Employee Share Posted March 3, 2022 @elc Could you send me a link to the actual equipment that is creating this challenge? On a more general note I think we have to strike a balance between the level of detail and speed of design. Some people have the luxury to sit and create drawings to an almost photographic level of detail (or they think ConnectCAD should include this content ready-made for the devices they just happen to be using). That's fine but someone has to spend a lot of time creating these models. Others prefer to get work out of the door quickly and are content with enough detail so that an installer can complete the job accurately. Generally ConnectCAD is focussed more towards speed with the option to add extra detail if you have the time. In this particular case I ask myself "is it really the end of the world if the rack frame is 1/2 a U shorter?". Perhaps it is. Please convince me. Conrad 1 Quote Link to comment
elc Posted March 3, 2022 Author Share Posted March 3, 2022 Hi @Conrad Preen you are right, I won't lose any sleep over this one, just thought/hoped it might be a relatively easy change? 🙂 right now, I show it as 1U device. only real issue I could see is, that when going through the documentation for support at a later stage, I won't see, that in fact we still have half a unit of space for something else in these positi ons. 🤷♂️ but I won't put up a fight over this. 😄 best, george PS: 1 hour ago, Conrad Preen said: for the devices they just happen to be using ...going through the images here our device doesn't seem to be some sort of unicorn? 😉 Quote Link to comment
Vectorworks, Inc Employee Conrad Preen Posted March 4, 2022 Vectorworks, Inc Employee Share Posted March 4, 2022 @elc unicorn? yeah that's a fair point. It just isn't quite as simple a change as one might think - there are many dependencies. 1 Quote Link to comment
Edward Carlson Posted February 27, 2023 Share Posted February 27, 2023 I also have this issue. A Bittree patch bay (B96DC-HNRSH/E3 M2OU7B) I have spec'd is 1.5U tall. For now I'm drawing it as 2U with a note beside it. Figured it was worth mentioning. 1 Quote Link to comment
spettitt Posted February 28, 2023 Share Posted February 28, 2023 Lots of Sony/Panasonic broadcast camera CCUs are 1.5U as well, I haven't tried to use these in ConnectCAD yet though. Quote Link to comment
Vectorworks, Inc Employee Conrad Preen Posted March 18, 2023 Vectorworks, Inc Employee Share Posted March 18, 2023 @spettitt Yes I've come across a few of those in my time... but I was always grateful of that extra 1/2U to let the equipment breathe a bit. Conrad Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.