timpower Posted November 28, 2007 Share Posted November 28, 2007 can someone here reiterate the current state of affairs regarding the Cd - VW plugins? I've recently purchased VW 2008 but haven't installed yet, as i am awaiting clarification on the plugin....i would rather wait than risk. please, if anyone from VW is listening, do not attempt to convince me to use RW, as that will only infuriate me. Does the plug in from VW 12 work in 2008 or is there an update? what is the state of affairs for C4d 10 or 10.5 with VE 2008? Quote Link to comment
Vectorworks, Inc Employee Dave Donley Posted November 28, 2007 Vectorworks, Inc Employee Share Posted November 28, 2007 Hello timpower: As Katie said on your other thread about this question, contact Maxon about the VW->C4D plugin. NNA does not produce this plugin, Maxon does. HTH, Quote Link to comment
timpower Posted November 29, 2007 Author Share Posted November 29, 2007 is that an attempt to stifle discussion or what? i was asking an open discussion on an open board.....can any one else answer my question? Quote Link to comment
Christiaan Posted November 29, 2007 Share Posted November 29, 2007 Tim, NNA are a bit sensitive about 3rd party renderers because they see them as competing with RenderWorks instead of adding value to VectorWorks. If NNA's position is that you can't get official support here for such plug-ins then fair enough but I think it's a bit unfair to suggest we can't discuss these matters here with other VW users. Imagine Maxon saying, sorry contact NNA about the VW->C4D plugin, Maxon does not produce VectorWorks. Quote Link to comment
G_Hannigan Posted November 29, 2007 Share Posted November 29, 2007 Called Maxon Tech Support yesterday. They say the plugin is being worked on - no date yet. Quote Link to comment
Guest Posted November 29, 2007 Share Posted November 29, 2007 Christiaan, Be careful of your assumptions. The simple fact is that NNA does not produce nor support the plugin. How is it expected that NNA is to support a product they don't even make? Quote Link to comment
Christiaan Posted November 29, 2007 Share Posted November 29, 2007 Katie, my main assumption is that discussing the plug-in with other users on the forum isn't NNA providing support. It's other users providing support. Quote Link to comment
timpower Posted November 29, 2007 Author Share Posted November 29, 2007 my point of view is pretty straightforward: i use VW and C4d, and have tried renderworks....I seriously doubt renderworks can ever compete seriously with C4d. If VW and C4d was ever to loose compatibility, i may instead opt to use Archicad and C4d instead of switching to RW. I hope we never have to come to this point. But, is that a risk that VW can afford to take? NNA, I honestly suggest you opne your platform as much as possible (ask Steve jobs what he thinks about that) when and where it makes sense. Just MHO Quote Link to comment
Guest Posted November 29, 2007 Share Posted November 29, 2007 Christiaan, I was referring to your first sentence in the post, which you've stated several times before. Quote Link to comment
Christiaan Posted November 29, 2007 Share Posted November 29, 2007 Oh right, well that's based on this comment: http://techboard.vectorworks.net/ubbthreads/ubbthreads.php?ubb=showflat&Board=20&Number=60614&Main=14058#Post60614 ...bug fixes that relate to products that compete with our own probably won't get absolute top priority... Quote Link to comment
Vectorworks, Inc Employee Dave Donley Posted November 29, 2007 Vectorworks, Inc Employee Share Posted November 29, 2007 Hello again timpower: I think it's great that you have a solution that is working for you. I just think it's annoying to post a question, not wait for a response from the other forum members, then start a new thread asking the question again 1/2 hour later. Katie, maybe we could use a third-party renderers section to the forum? Quote Link to comment
Christiaan Posted November 29, 2007 Share Posted November 29, 2007 Katie, maybe we could use a third-party renderers section to the forum? I think that's a good idea. You could even post a disclaimer saying that NNA doesn't officially support the plugins and the forum is for discussion only. Quote Link to comment
timpower Posted November 30, 2007 Author Share Posted November 30, 2007 sorry - it is not my intention to annoy anyone. My lack of patience is based on the fact that recent upgrades have totally broken my work flow, and after having spent lots of tine and money to 'upgrade', I have recently had to go through the downgrading process of reinstalling older programs and OS's. In the meantime, Leopard and VW 2008 is on the shelf - waiting to upgrade again for a second time ------ when clients are waiting for their work to be completed, they don't care whose fault it is that the plug-ins are not updated! BTW - I support idea to start a third party rendering forum. Quote Link to comment
Christiaan Posted November 30, 2007 Share Posted November 30, 2007 when clients are waiting for their work to be completed, they don't care whose fault it is that the plug-ins are not updated! The buck stops with the person managing the upgrade. It's not NNA's or Maxon's fault. The person upgrading the software should have checked which software wasn't compatible before upgrading. Quote Link to comment
timpower Posted November 30, 2007 Author Share Posted November 30, 2007 (edited) you're right - my fault. I'll accept that. But I also note that every other software package as well as all hardware I use has gone through 3 OS upgrades without any glitches. Edited November 30, 2007 by timpower Quote Link to comment
timpower Posted December 1, 2007 Author Share Posted December 1, 2007 further opening the VW program as much as possible to what WE architects and designers do on a day to day basis is necessary in order to help the program grow - any communication which advocates the opposite ('we do not support', or 'we do not produce', or 'contact some else') makes it hard for my non VW colleagues to want any thing to do this program! They see this and walk away! My experience is that when I am 'inside' the VW environment I am very satisfied, but any attempt to communicate with any environment outside, is nothing short of a constant struggle. You at VW can agree or not, but that is how it is for THIS user. Quote Link to comment
Christiaan Posted December 1, 2007 Share Posted December 1, 2007 Tim, as much as I like to criticise a few aspects of its operation, I think NNA are a pretty amazing company to be honest. I'm not aware of many companies this size who are so responsive to users and have so many staff who actively participate in a discussion forum like this. To produce the software they produce at the price is laudable too. But this is one area where I like to poke them with a stick. It makes perfect sense not to officially support 3rd party software. Why would anyone in their right mind suggest NNA should do otherwise? However, 'officially supporting' and 'open communication' are two different things and NNA seem prone to getting them mixed up. I'd love to see NNA working actively with 3rd party software makers to ensure their products are compatible (and for NNA to start seeing 3rd party renderers as VW value-adders instead of competitive threats to RW). I'd like to see NNA provide notices on their VW updates page to warn users about potential problems with 3rd party software. And I'd like to see NNA allowing open discussion about 3rd party software on their forums. But none of the above need be considered "supporting 3rd party software." Quite the opposite: they'd be supporting their *users,* some of whom happen to want to use 3rd party software with VectorWorks. Quote Link to comment
Guest Posted December 1, 2007 Share Posted December 1, 2007 NNA does actively communicate with 3rd party vendors, including C4D and ArtLantis. There is a general industry standard where the 3rd party product manages the compatibility statement. Quote Link to comment
Christiaan Posted December 1, 2007 Share Posted December 1, 2007 There is a general industry standard where the 3rd party product manages the compatibility statement. It doesn't have to be a compatibility statement Katie. Simply a prominent reminder, to check 3rd party software compatibility (with the relevant developers), on your updates download page and your DVD packaging would be enough. Quote Link to comment
timpower Posted December 3, 2007 Author Share Posted December 3, 2007 Tim, as much as I like to criticise a few aspects of its operation, I think NNA are a pretty amazing company to be honest. I'm not aware of many companies this size who are so responsive to users and have so many staff who actively participate in a discussion forum like this. To produce the software they produce at the price is laudable too. I agree - I think the software is great, the service quite good - the price is OK. But there is always room for improvement - I think VW needs to get more users on board however, and any means to get VW to a tipping point should be encouraged. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.