Doors / windows in wall recess

[Piotr Karczewski]

Today I was experimenting with doors and windows in recess.
I have found some difficulties to solve.
1st image is Jamb depth 300mm (wall 600mm) recess 400mm, Insert relative to: Interior Face of Jamb

\

 

2nd image is Jamb depth 200mm= (wall - recess) (wall 600mm) recess 400mm, Insert relative to: Interior Face of Jamb

 

3rd image is Jamb depth 200mm= (wall - recess) (wall 600mm) recess 400mm, Insert relative to: Interior Face of Jamb

 

4th image is Jamb depth 200mm= (wall - recess) (wall 600mm) recess 400mm, Insert relative to: Exterior Face of Jamb 

5 th image is Jamb depth 200mm= (wall - recess) (wall 600mm) recess 400mm, Insert relative to: Center Face of Jamb 

 

Nor of above are acceptable, but the closest solution is 1st one - Jamb depth 300mm (wall 600mm) recess 400mm, Insert relative to: Interior Face of Jamb

But what about the gaps? Of course I can extrude something there but I'm looking for a solution door/walls recess tools.


Fot now, my only idea is to create a wall which is (wall - recess) thick than add an extra wall (recess thickness) in a front of thick wall and create an opening in it or open recess.

Probably I have answered for myself, but it comes to my mind right now.
So maybe I leave it for future generation 😜

Any ideas? @Jeff Prince I have seen that Your an expert of pop-out window, maybe You know the solution here?


Thx in advance!

Edited February 22 by Piotr Karczewski

[Jeff Prince]

45 minutes ago, Piotr Karczewski said:

Any ideas? @Jeff Prince I have seen that Your an expert of pop-out window, maybe You know the solution here?

 

Hmmm.... I haven't dealt with that one, but I think your last method, which is like my pop-out window method, might be a good solution.  Hopefully one of the architects here will chime in and have some ideas.  I'll take a look at it this evening and see what I can come up with.

[Tom W.]

Yes I'd do a variation on the last method + make it using four separate Walls:

 

 

 

The thick section of Wall over the recess needs to be on a separate class that you turn off in Top/Plan though.