Darren K Posted November 30, 2016 Share Posted November 30, 2016 Hi, I am trying to find a work around for making a six-rack of lekos. I basically just got them spaced properly, and then copied them for each instance. The issue I am having, is that when I move a group of 6 to a light position, and then change the z value of that position, only one of the fixtures moves with the position to the new z value. Each of the 6 shows in the OIP that they are on that position, but they don't "follow" it. Any ideas? Thanks! DK Quote Link to comment
markdd Posted November 30, 2016 Share Posted November 30, 2016 Are you absolutely sure that all 6 fixtures are "picking up" the new position? Check in the position field of each fixture. If they haven't all picked up the position then as long as the position is within the parameters of the spotlight preferences (I think by default it is 1'6") then you can "nudge" them up and down and they almost always take the position that way. Let me know what happens Mark Quote Link to comment
Darren K Posted November 30, 2016 Author Share Posted November 30, 2016 I did check each fixture, and each one says "Truss 3" in the OIP. I just tried selecting one group of six, moved them off of the truss, and deleted the position name in the OIP of each fixture. I then selected them again and attached them to the position. Each fixture now says "Truss 3" in the OIP, but only one of them follows it when I change the Z value. Okay, one thing I just noticed. I have 5 x 50 degree and 1 x 26 degree in each group. It is only the 26 degree that follow the truss. Both symbols came from the same ETC folder, and the two OIP values are identical (other than actual name and beam angle). Maybe there is something else to check? Thanks! DK Quote Link to comment
markdd Posted November 30, 2016 Share Posted November 30, 2016 (edited) Have you grouped them together? Did they pick up the position height before you changed the position? Edited November 30, 2016 by markdd Quote Link to comment
Darren K Posted November 30, 2016 Author Share Posted November 30, 2016 Hmmm. My position height for the truss starts at 0'0", so it is hard to tell. I selected them together and moved them (to keep the spacing). I just tried making them a group, but then the stop existing as fixtures. If I make them a multi-circuit fixture, then they all follow the truss, but then (I believe) focusing individual fixtures will be an issue. Also, copying as a multi-circuit group creates another 6 individual fixtures, so I would have to copy each group, then make each one a multi-circuit, then attach it to the truss. I'm not sure this is the answer. Thanks! DK Quote Link to comment
markdd Posted November 30, 2016 Share Posted November 30, 2016 Making them a multi circuit won't help (sadly). I'll try and recreate here and let you know what if anything I come up with, but won't be till tomorrow though (UK time!) Quote Link to comment
Darren K Posted November 30, 2016 Author Share Posted November 30, 2016 Ok, thank you so much! I would attach the file, but there is so much other stuff going on in there that it wouldn't be of much help. I will try to re-create it with a new file as well. Quote Link to comment
markdd Posted December 1, 2016 Share Posted December 1, 2016 @Darren KI have tried to recreate what you described and can't find the reason why you are having the problems. I think that @Rob Booksmakes a good point. Maybe check each instrument in turn to make absolutely sure they have all picked up the position correctly. Quote Link to comment
Darren K Posted December 1, 2016 Author Share Posted December 1, 2016 Ok. Thank you very much for trying! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.