acdeslx Posted September 28, 2012 Share Posted September 28, 2012 Hey all. I'm running VW2012 and have run into an issue. My projectionists have already figured out that they want to do a 76'x24' screen with two projectors using a .67 lens. I'm just trying to put this into the plot to work out rigging and lighting angles but no matter what I do, the plug-in insists that I use three projectors. I tried changing the "Area Horizontal Count" but it won't accept anything other than three. Is there a way to adjust this? Thanks. Dave Quote Link to comment
Fergy Posted September 28, 2012 Share Posted September 28, 2012 Works fine for me, and the math works out PROVIDED you're using 16:9 projectors. Make sure you've selected those, not 4:3 and you'll be good to go. Quote Link to comment
C. Andrew Dunning Posted September 28, 2012 Share Posted September 28, 2012 Dave - Brian is right. With 4:3 projectors the tool won't let you do any less than 3 areas. With 16:9, you'll be allowed to do 2. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.