AndiACD Posted November 5, 2008 Share Posted November 5, 2008 Many have made suggestions of what they would like to see in VW. Well, i've just been blown away by the capabilities of what this piece of kit has to offer. http://www.solidworkspremium.com/ Does 2009 get anywhere close to this? Quote Link to comment
GWS Posted November 5, 2008 Share Posted November 5, 2008 Although there have been many improvements to VW of the years I can't help thinking that the Machine Design side of things has rather been left behind which is a great pity. I too have been playing around with SW running through parellels on my Macbook Pro and have been very impressed. VW is a great program, but it would be nice to at least have 3D dimensioning if not 3D constraints. Quote Link to comment
Charlie_P Posted November 6, 2008 Share Posted November 6, 2008 Having used both undoubtedly Solidworks is an excellent program. It is however very good at what it does because it works in one area, mechanical CAD, and restricts the user to work in a particular way. Components have to be parametrised from the initial 2d sketch onwards, for instance - which is fine when you know in advance what the physical and area constraints will be; not usually the case though. Great when you know where you're going, less good when you're playing around finding the best way to get there. It also depends what you're drawing. VW has a pretty good stab at almost anything, Solidworks is purely mechanical. For instance VW will handle large amounts of OS Landplan data and follow the tangle of classes/layers on import perfectly well. Solidworks just can't do this. There are some direct comparisons where SW is not as good as VW. Duplicate array is easier and more powerful in VW than the SW equivalent, 2d drafting is SW is nowhere near as powerful; on the other hand VW lacks 3d dimensioning and the parametrics are almost laughable. It's horses for courses ultimately. VW is Jack-of-all-trades (and you could very well say master of none) whereas SW is mechanical CAD done very well within the way it works which personally I find too restrictive. Quote Link to comment
Larry B. Posted November 6, 2008 Share Posted November 6, 2008 I was thinking of upgrading to 2009, and was wondering if pipe threads and teeth on bevel gears has made it to the new version. Please list any more improvements over VW12.5. VW has the foundation to be a very powerful mechanical program, but it seems most of the attention is given to other areas. Thanks, Larry Quote Link to comment
Guest Tomu Posted November 6, 2008 Share Posted November 6, 2008 Hi Larry, Yes. Pipe threads (both 2D and 3D) and teeth on 3D bevel gears have made it into Vectorworks 2009. Plus, Vectorworks 2009 utilizes powerful Parasolid technology for more robust 3D modeling. For more go to: http://www.nemetschek.net/machinedesign/new2009.php?feature=Productivity Tom Urie Nemetschek, N.A. Quote Link to comment
Larry B. Posted November 6, 2008 Share Posted November 6, 2008 (edited) Thanks Tom for the prompt reply, I am going to place my order. I looked through the available "What's New" on the website, but could find very little about Machine Design. You have an excellent product, and have to "blow your horn more" about Machine Design features, like a white paper listing them. Thanks again , Larry Edited November 6, 2008 by Larry B. Quote Link to comment
AndiACD Posted November 7, 2008 Author Share Posted November 7, 2008 here, here! Hi Larry, i made a fuss about this lack of real world specific Machine Design movies and tools displayed in the "What's New" section of VW2009. No Joy! Hi Tomu, Sorry mate same rules apply for your link. It doesn't appear to have anything to do with Machine Design either, except of course the page title. Is there not one "Mechanical Engineer" in NNA? Someone who can demonstrate how someone from this profession can show MD in all of it's glory? Wow, us. Please! Is this too much to ask?? Quote Link to comment
GWS Posted November 7, 2008 Share Posted November 7, 2008 Alot of the stuff illustrated in the What's New section of MD doesn't really seem to be particularly Mechanically based....e.g. "3D Wall Improvements" and "Site Modifiers Applicable to Existing Site Models" which I'm sure are great but not specific to a Mechanical Engineer. A more 'tuned' MD section would be helpful. Quote Link to comment
Oyvind Posted November 7, 2008 Share Posted November 7, 2008 Tomu, Pipe threads in 2009? Where/how?? Quote Link to comment
Larry B. Posted November 11, 2008 Share Posted November 11, 2008 I just installed my new upgrade 2009 on Vista 32, and am also having trouble finding the pipe threads. I found the pipe threaded holes, and the acme and bearing locknut threads, which are very nice, thank you. Larry Quote Link to comment
Larry B. Posted November 18, 2008 Share Posted November 18, 2008 It's been a week now, has anyone found those elusive pipe threads in VW2009? Thanks, Larry Quote Link to comment
AndiACD Posted November 19, 2008 Author Share Posted November 19, 2008 Try sending a PM directly to Tomu. i know he should have answered here, but the lack of posts made me think he'd already replied via PM. if he's also in the dark ask him to refer you to "one who knows". Bad boy Tomu!! Quote Link to comment
Guest Tomu Posted November 20, 2008 Share Posted November 20, 2008 Hey Guys, I been on vacation (I guess that's a good excuse for not responding before now :cool:) The pipe threads can be found in the tapped hole objects. To create an "external" thread, set the Hole Type to "Through Hole" and the Tap Drill Length to the same value as the Thread Length. Please let me know if this doesn't give you what you need. Quote Link to comment
AndiACD Posted November 20, 2008 Author Share Posted November 20, 2008 i guess holiday will do . . . . . . Quote Link to comment
Larry B. Posted November 21, 2008 Share Posted November 21, 2008 Hi Tom, As you said in your post"Please let me know if this doesn't give you what you need." I really expected to see the pipe threads as part of the Shaft Tool. The threads could be placed on either end of a shaft, with control of the end chamfer, which we don't have with the new method, and provide a pipe nipple or fitting. Thanks, Larry Quote Link to comment
Guest Tomu Posted November 21, 2008 Share Posted November 21, 2008 Larry, You have a good point there. I will look into adding pipe threads to the Shaft tool for a future release. Tom Quote Link to comment
Larry B. Posted November 22, 2008 Share Posted November 22, 2008 Thanks Tom, Enclosed is part of a drawing, that is typical of what I need. Larry Quote Link to comment
GRC Posted December 4, 2008 Share Posted December 4, 2008 I just loaded my copy of VW09 and read in a microscope stage. VW09 wouldn't draw one of the plates! It gave an error message saying to draw it again. The plate is very complex and I don't want to have to do that. It also drew the holes with a very low resolution set of polygons. I think this thing was put out half-baked. Quote Link to comment
AndiACD Posted December 4, 2008 Author Share Posted December 4, 2008 SciMan, This hissy fit that VW throws on a regular basis is usually down to Crossed Lines(not wires, although there are plenty of them too). When Adding and/or Subtracting solids particularly with threads VW complains a lot. Even now in 2009. The best way around this is Zoom in close and try a bit of "Nudging". Hardly a suitable solution, i know, as you and your microscope will need a lot more precision than even i look for(which is a helluvalot), but, if you zoom in enough the "Nudge" doesn't make such a noticable difference, unfortunately it takes forever to find which part is causing the problem, and then the best direction in which to Nudge is a stab in the dark. It wouldn't be quite so bad if, VW, when it warns you "that the object you have created cannot be computed", it, instead of deselecting everything, told you which were the offending parts so you knew which bits TO edit Quote Link to comment
AndiACD Posted December 4, 2008 Author Share Posted December 4, 2008 Sounds like you also need to change a few of the defaults in the Preferences too . . . . . . for the low res trouble . . . . . Quote Link to comment
jimho2036 Posted February 7, 2009 Share Posted February 7, 2009 There are no pipe thread tools in my installation of VW 2009. Quote Link to comment
AndiACD Posted February 7, 2009 Author Share Posted February 7, 2009 Hey Jim, As you may have noticed, Tom Urie above(Tomu) realised that the requests about Pipe Threads were valid and is pushing(i think) to have them included in the next upgrade, SP3. What are you using? MD SP1, SP2? Quote Link to comment
jimho2036 Posted February 7, 2009 Share Posted February 7, 2009 Hello Andy, I saw the earlier references to "pipe threads". And I'm gonna be picky here. Pipe threads are normally tapered. I had assumed that VW would address the NPT series of pipe threads Yes, there are straight pipe threads, but they are less common. I do a lot of designing of systems that use compression fittings for tubing (Plastic and metal) and I would like to be able to distinguish easily in my drawings between straight threads and tapered threads. Quote Link to comment
Guest Tomu Posted February 9, 2009 Share Posted February 9, 2009 Andy, Jim, The only "pipe tools" in 2009 are the Hole - Tapped tools which contain both NPT and NPS threads. There will not be anything new pertaining to pipe threads in SP3. Quote Link to comment
AndiACD Posted February 9, 2009 Author Share Posted February 9, 2009 Hi Tom, thanx for the update on pipe threads and their existence in 2009. Whilst i personally don't have a great need of either NPT or NPS pipe threads, maybe you could enlighten all of us as to where we all might find them in MD, as it would appear that they are not as easy to find as one might think due to the many requests that they could be added to VW. forgive me for stating the not so obvious . . . . . . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.