RuudB Posted January 26, 2016 Share Posted January 26, 2016 (edited) Hello all, I'm stuck with three simple problems. The first one I already asked on this forum, so I'm not posting it here. 1. Extrude a plane along a 3d curve. Within the menu this is possible to do it with locking the profile plane and fixing the profile. When using Marionette it should be possible when adding to lines to the script of the node. But for some reason this is not working. 2. Duplicate a plane along a 3d curve. Within the menu this is possible to do, but not with rotating the plane in the horizontal direction of the curve. I succeeded partly in making this in Marionette, because I failed in selecting the drawn plane. Besides that I didn't succeed in rotating the plane. I hope someone can help me further with these two questions. Giving me some possibilities with Python would be helpful too. I added a file to show you the output I like to have. Thanks in advance! Ruud Edited January 26, 2016 by RuudB Quote Link to comment
AlanW Posted January 27, 2016 Share Posted January 27, 2016 Hi, I think you will find that the German Move node does not work, Just discovered this yesterday. So I replaced your node with mine and they worked. Refer to attached file. HTH Quote Link to comment
RuudB Posted January 27, 2016 Author Share Posted January 27, 2016 Hello Alan, Thanks for helping again. Your attached file is still not giving result. I checked the script behind your "Move" node, but I can't see the difference with the original one. I my case the "Move" node is not reading a list of points, what it should be able to do. Maybe you can explain what you changed in the node, so I can think with you. Ruud Quote Link to comment
Patrick Winkler Posted January 27, 2016 Share Posted January 27, 2016 (edited) Hi Ruud, before moving the object multiple times you have to duplicate it. Otherwise the object is moved by the sum off all the offset values. regards Edited January 27, 2016 by Patrick Winkler Quote Link to comment
RuudB Posted January 27, 2016 Author Share Posted January 27, 2016 Thanks Patrick! This works very well Hope to find the other answers too. Quote Link to comment
AlanW Posted January 30, 2016 Share Posted January 30, 2016 Patrick, could you post the VW file for this as it is not working for me. Thanks Quote Link to comment
Patrick Winkler Posted February 1, 2016 Share Posted February 1, 2016 Sorry Allan, I 've already dumbed it, where to you stuck? Quote Link to comment
AlanW Posted February 3, 2016 Share Posted February 3, 2016 Hi, I copied your network and all I got was a group of rectangles in one area. So not sure what you did to get the offset in yours. Thanks Quote Link to comment
Patrick Winkler Posted February 3, 2016 Share Posted February 3, 2016 Take a closer look You passed the Rectangle into the 'Divide Curve'-Node... Quote Link to comment
AlanW Posted February 3, 2016 Share Posted February 3, 2016 (edited) LOL thankyou I need better glasses, I thought I copied it exactly. Think its eyesight combined with touch of sanility. Edited February 3, 2016 by Alan Woodwell Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.