Anouska34 Posted April 21, 2008 Share Posted April 21, 2008 Hi! I just did a course using Vectorworks 12.5 where we learnt how to show an internal room elevation/section using the following commands in the design layer - View- Create Section Viewport - then the section would be selected and then shown on the sheet layer. However I only have version 11 - and I dont have 'Create Section Viewport' under View - I only have 'Create Viewport' which does not allow me to create an Internal Section View - so i really rwally need some help!!! Does anyone know how I can do this on Vectorworks 11?? Quote Link to comment
CipesDesign Posted April 21, 2008 Share Posted April 21, 2008 Sorry. VW's 11 can't do that. If you need that capability you'll have to upgrade. Quote Link to comment
mark@custom Posted April 21, 2008 Share Posted April 21, 2008 Look for the "Cut 2D Section" or the "Cut 3D Section" menu items. I think they're under the Model pull down menu. It's been awhile since I used 11. For more details - do a search on those terms with VW Help. Good luck... Quote Link to comment
Anouska34 Posted April 21, 2008 Author Share Posted April 21, 2008 Will I have to upgrade to VW 12.5? Do you by any chance know the cost of that upgrade? Quote Link to comment
Vectorworks, Inc Employee PVA - Admin Posted April 21, 2008 Vectorworks, Inc Employee Share Posted April 21, 2008 Anouska, if you call 410-290-5114 and ask to speak with either sales to tech support about upgrading, they can check your serial number and will give you an exact quote for whichever series you want to update to. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.