willofmaine Posted September 17, 2006 Share Posted September 17, 2006 I have a simple double hung window with 3 1/2" exterior trim and a 1 3/4" sill. I have both the Sill Lip (1) and the Height (3) set to 1 3/4", and I do not have "Trim Under Sill" checked. It looks as excpected in the window preferences preview, but when I do a hidden line elevation, there is an additional blue line below the 1 3/4" sill; it looks like it might be the "container box" of the window as if it were assuming that the 3 1/2" trim also went along the bottom of the window, which of course it doesn't. Any suggestions? Thanks! Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted September 17, 2006 Vectorworks, Inc Employee Share Posted September 17, 2006 What version? Quote Link to comment
willofmaine Posted September 17, 2006 Author Share Posted September 17, 2006 I'm using 12.0.1, but I figured out at least half of the problem: I'm using an underlay from ACAD, so I had the wall fill set to "None" so that I could see and snap to the underlay's window locations. Setting the wall fill to "Solid" has (mostly) hidden the lower blue line when generating hidden lines, but, as evidenced in wireframe views, the window's "box" still extends down below the sill, in spite of my settings. So, any thoughts on that might be helpful... Thanks! Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted September 18, 2006 Vectorworks, Inc Employee Share Posted September 18, 2006 Send an example file to dfortin@nemetschek.net along with an explanation. Quote Link to comment
willofmaine Posted September 18, 2006 Author Share Posted September 18, 2006 Will do, thank you. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.