VW2024 Data Tags Text Alignment

[Rolan Castaneda]

Data Tag Vertical Text Alignment is defaulting to Top.  If the Field Label is 2 lines high, vw24 is pushing the alignment to the top even though I have the vertical alignment set to Center.

[Nikolay Zhelyazkov]

Hello @Rolan Castaneda,

 

Can you share a test file that shows this issue?

 

Thanks,

Nikolay Zhelyazkov

[Rolan Castaneda]

Sure.  See how the "W" is no longer centered along the X axis?  But if you edit the symbol, you'll see the center of the text is along the X axis, and its vertical alignment is set to Center.

 

 

Data Tag Test.vwx

[Nikolay Zhelyazkov]

15 hours ago, Rolan Castaneda said:

Sure.  See how the "W" is no longer centered along the X axis?  But if you edit the symbol, you'll see the center of the text is along the X axis, and its vertical alignment is set to Center.

 

 

Data Tag Test.vwx 175.84 kB · 1 download

- Thanks for the test file, I was able to see the problem and will look into it. In the meantime, the workaround that you can use is to make the text in the layout single line, as shown in the image below. Then the alignment will not be changed.

 

 

Best Regards,

Nikolay Zhelyazkov

[Rolan Castaneda]

9 hours ago, Nikolay Zhelyazkov said:

- Thanks for the test file, I was able to see the problem and will look into it. In the meantime, the workaround that you can use is to make the text in the layout single line, as shown in the image below. Then the alignment will not be changed.

 

 

Best Regards,

Nikolay Zhelyazkov

I figured out the workaround, but I don't want to waste time editing all my existing data tag symbols with this situation when it used to work just fine in prior versions.  I'll wait to use v2024 when this is fixed.  Yes, I have a lot of data tags.  Thanks for looking into this, and I hope it gets fixed in the next service pack.