Wood Posted February 23, 2023 Share Posted February 23, 2023 I built a truss with the VW curved truss tool. It won't allow me to update the distributed weight in the OIP. This happens regardless of what cross section I use, or if I'm in a fresh drawing. Bug? Or am I missing something. Thanks! Quote Link to comment
Vectorworks, Inc Employee jcogdell Posted February 24, 2023 Vectorworks, Inc Employee Share Posted February 24, 2023 Does the circular truss have a weight, there is a known issue at the moment where if you don't define a circular trusses weight at creation it can't changed later, this will prevent a successful calculation. Otherwise as far as i can tell a my end it is working correctly and I can attach a distributed load. The only tricky thing is that the distributed load tool only draws straight lines so you need to be careful to draw in small segments that stay within the trusses geometry. if this doesn't help or you continue to have problems please post a file and I'll have a look Quote Link to comment
Wood Posted February 24, 2023 Author Share Posted February 24, 2023 10 hours ago, jcogdell said: Does the circular truss have a weight, there is a known issue at the moment where if you don't define a circular trusses weight at creation it can't changed later, this will prevent a successful calculation. Otherwise as far as i can tell a my end it is working correctly and I can attach a distributed load. The only tricky thing is that the distributed load tool only draws straight lines so you need to be careful to draw in small segments that stay within the trusses geometry. if this doesn't help or you continue to have problems please post a file and I'll have a look That's the issue, I was trying to give the circular truss a weight within it's OIP. That's an unfortunate bug! I'll recreate the radius truss with a weight at creation then, thanks for the tip. Quote Link to comment
Vectorworks, Inc Employee jcogdell Posted February 27, 2023 Vectorworks, Inc Employee Share Posted February 27, 2023 Unless you are planning to use custom built circular trusses use the standard truss tool with manufacturer based curved truss sections, that should avoid the problem Quote Link to comment
Will Sutliff Posted April 7, 2023 Share Posted April 7, 2023 (edited) On 2/27/2023 at 1:38 AM, jcogdell said: Unless you are planning to use custom built circular trusses use the standard truss tool with manufacturer based curved truss sections, that should avoid the problem Where can I find a 20' diameter 12" curved truss from Tomcat? I'm not seeing anything in the premium libraries or VW libraries. Thank you. Edited April 7, 2023 by Will Sutliff Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.