Bryan_dup1 Posted June 17, 2002 Share Posted June 17, 2002 Yes I know that the update doesn't change the version number. Anyway, I've downloaded the Mac update twice, run it several times, the update says that I am updated but none of the problems are fixed. My question is what went awry Katie &/or Matt. Quote Link to comment
Bryan_dup1 Posted June 17, 2002 Author Share Posted June 17, 2002 Mac G4-400, OS 10.1.5, 512 Ram Quote Link to comment
Guest Posted June 18, 2002 Share Posted June 18, 2002 I am not quite sure what is causing this problem right now. I've put in a note to the engineers to see if they might have any good advice to share with us as to why this happens. I've seen it happen a few times to people on the message board and to oen or two folks that have called in. There are two options (for now) to resolve this problem. You can try to remove the VW 9.5.1 prefs file and delete it. Change the VW folder back to 9.5.1, launch the program. Close the program and run the updater. See if that helps. If that doesn't do the trick, you might have to reinstall VW 9.5.1 from a clean install. Launch the program to write the prefs file and then close it. Run the updater, rename the VW folder and launch the program. See if it says VW 9.5.2 now. Quote Link to comment
Bryan_dup1 Posted June 20, 2002 Author Share Posted June 20, 2002 Thanks Katie, I've tried to find the VW preference file to delete it but don't know where it is under OS X. Any suggestions? Quote Link to comment
Guest Posted June 21, 2002 Share Posted June 21, 2002 Try the OS 10 system folder - library or users library and you should see a VW 9.something Prefs file. If you still can't find it, try a sherlock for the file called VW 9.5.1 Prefs and see how that works out. Quote Link to comment
urimevs Posted June 22, 2002 Share Posted June 22, 2002 Hello I updated recently to 9.5.2 The install process was just fine but did not update anything. I verified this fact by getting the version of VectorWorks which stayed at 9.5.1 Happened in OS X had to do the install until it worked Properly hope this helps Quote Link to comment
Bryan_dup1 Posted June 25, 2002 Author Share Posted June 25, 2002 Deleting the Prefs file didn't solve the problem. I reinstalled the entire program and then updated which worked. Anyone else doing this be sure to make note of your favorite options from the Vectorworks & Documents Prefs. area and remove your drawing templates because they will all default to the software original state. I'm glad I remembered that before reinstalling. Quote Link to comment
jengraycat Posted June 26, 2002 Share Posted June 26, 2002 I've been having trouble updating to 9.5.2 in Windows. I'm not sure what else to try, but it doesn't seem to like the folder I've been pointing it to. I can't get it to activate the "next" button to continue the install. Very annoying. Also, does anyone know if it's okay to get rid of old versions of Vectorworks once new ones are installed? I've made sure I have all my preferences and stuff, but I really can't afford to just use up that hard drive space. Thanks. Quote Link to comment
Guest Posted June 26, 2002 Share Posted June 26, 2002 Are you selecting a VW 9.5.1 folder? If you are not selecting a VW 9.5.1 folder, you need to select that folder. If you do not have one, then you need to update the current version you have up to VW 9.5.1. Quote Link to comment
jengraycat Posted July 1, 2002 Share Posted July 1, 2002 I am selecting the 9.5.1 folder. It doesn't do anything when I select it. I did the same process as I did when I updated to 9.5.1 from 9.5.0. I select the folder and the button still doesn't highlight. Don't understand why it work for one update and not for the next. Jen Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.