Stephan Moenninghoff 386 Posted August 30, 2018 (edited) Here's a video of a school bus conversion project carried out with interiorcad, using a point cloud and AR for early prototype viewing. All CNC code is generated straight from the model and the entire interior will be custom-built. AR is the thing to have. I really hope for more capabilities of AR in the future. I want to be able to tap a drilling in a part to see its specifications. I really think AR needs to be where the production takes place - on the workshop floor. This would close the widening gap between construction office and workshop. The current trend is for production documents and CNC code to be generated end-to-end and those production data are then given to the guy in the workshop running the CNC. He may be given some sections and detail drawings but that's kind of old school. If he could just look at a 3D model in AR, his life would be easier, production would be more streamlined and the whole process would be less error prone. Edited August 30, 2018 by Stephan Moenninghoff 6 Quote Share this post Link to post