Lili Vincent
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Marionette
Store
Posts posted by Lili Vincent
-
-
On 7/8/2017 at 0:34 PM, Lili Vincent said:
Oh no.... I accidently deleted the under layer to the fork and now i cant 'Undo' any more times
Hi I was just wondering is there any possible way I could change the shape from this to more a 'splade' look??
-
Oh no.... I accidently deleted the under layer to the fork and now i cant 'Undo' any more times
-
2 minutes ago, Hans-Olav said:
Hi Lili
I must admit i haven't used the subdivision tool much and are following the thread to learn more. I guess the sharp edges is a point or edge that you can select and crease. Creasing works on points, edges and surfaces. The leftmost bump in your drawing is soft so if you examine how it is done and do the same on the next.
Okay sounds good- im worried when i send this for 3D printing it will be very out of proportion due to me not measuring each shape i make.. what do you suggest?
-
52 minutes ago, Hans-Olav said:
Are u aware how I can curve the edges under the handle (see how there a bit pointy)??
-
How come when i place my objects they look like this and yours looks like this ??
-
1 hour ago, Alan Woodwell said:
I can't open your file as it's was a student version last time.
as you can see by modelling you can change as you go or at anytime. Size and scale, unless you are making an exact replica you are the designer so anything goes.
Yes I am making the exact replica to be made for people so i have to make sure it isn't completely out of proportion. I will give it a go of making the curves along the handle now
-
21 hours ago, Lili Vincent said:
That video is so helpful, ill try myself now but using those skills i can create more curves in the handle like the original photo i attached. Im excited :)))
Would you be able to insert your file also? If i send mine in will you be able to open it??
Also, do i have to make the exact measurements as I am going or can i edit them at the end? As this is going to be 3D printed so the sizing must be appropriate.
-
That video is so helpful, ill try myself now but using those skills i can create more curves in the handle like the original photo i attached. Im excited :)))
-
1
-
-
Can't wait to watch it !! Keep me updated
-
Only if you had time, a tutorial on the handle would be amazing !!!!!!! If not whatever you can do is that helpful !!!!
-
10 minutes ago, Alan Woodwell said:
@Lili VincentHi, Unfortunately i cannot open your file as its a student version and cannot be opened by a professional version. All I can say at present is look closely at the video and make sure your fillit is not more than 1/2 the thickness of the extrude. Type in 0.5 (it will still show as 1) but try this.Can look tonight say 4hrs time.
Oh thats unfortunate, yes whenever you can is perfect!! I really am liking the tip of the cutlery item just cant enjoy the handle and the connector the same way !!!
Thanks Again :))))
-
Ive tilted the tip of the cutlery item as im wanting it to face down. Im so sorry for all the questions you just have been a lot of help.. and im over time in handing it in
This is the design i am hoping for (inspiration given by image attatched as well)
Ive created the handle, the tip now just wanting a connector like in the image below where the user can 'pinch' onto
-
On 7/2/2017 at 9:29 AM, Alan Woodwell said:
@Lili VincentSee Video on my Youtube channel - This is a bit rough so apologise but you get the idea how to do it . HTH
youtu.be/QWgVFNw317g Paste this into google to see video or look Youtube channel Alan Woodwell. Be up in about 10 min
That is honestly so much help!!! Im up to the 3D filleting stage yet my shape doesnt seem to looked filled even though the fill button is on therefore the filleting is not working ?? I downloaded my file if that was any help to you
-
1 minute ago, Alan Woodwell said:
@Lili VincentGive me 1/2hr and show you on video.
Thats so helpful, Thank you so so much !! Means a lot.. its due today to be sent off so ill be online all day !!!
-
You have been such an amazing help.. I am just really stressing because its due so soon and I can't see it working out. Would you know how to draw this shape on vectorworks for the tip of the cutlery item. Also how would i connect the 'tip' of the cutlery item to the 'handle'
THANK YOU !!!!
-
2 minutes ago, Alan Woodwell said:
@Lili VincentHi, hit 1 on the num pad this will rotate it to see the 3d
Where abouts is that?? Thank You
-
On 6/27/2017 at 1:43 PM, Alan Woodwell said:
Hi, Is this what you are after??
Draw poly lines and then alter the each vertex to the desired curve. then extrude and fillet the edges from the 3d tool set.
Hi this is perfect, but when i open it up in vector works its a flat object. I am needing it to be designed so that when I send it off to a manufacturer it prints 3D.. i like the shape you made - just needs to be almost tubular and rounded for ergonomic reasons
Thank You so much
-
19 hours ago, mike m oz said:
Hi there, I was wondering how do i make the edges smooth rather than indented so sharply. Thank You
-
On 7/31/2003 at 1:28 PM, Spencer said:
I'm trying to draw the bowl of a spoon. Suggestions on strategy appreciated.
Here's what I tried.
Elipse converted to nurbs to define the plan view. Two nurbs profiles in x and y planes to define the shape of the bowl from side and end view. They go form side edge to side edge and tip to back of bowl. Surface from curves doesn't work until you split the nurbs elipse into 4 pieces to make all open nurbs curves.
This nearly works. But when I shell it to get thickness, the edges are tilted and discontinuities occur at the split points.
Any better ideas?
Any idea on how i could draw this on Vectorworks, its my major works and its due so soon but I cant see to know how to do it !!!!!!!!
-
Okay perfect. Do you have any suggested tutorials or videos ???
-
On 7/31/2003 at 1:28 PM, Spencer said:
Hi there, I am trying to design cutlery on Vectorworks 2017 for my DT Major Design Project but am having difficulty working the programs tools to do so. Thank you :)))))
Help on 3D strategy to draw a spoon.
in Solids Modeling
Posted
How do i remove the column in red???