Jump to content

FredM

Member
  • Content Count

    37
  • Joined

  • Last visited

Posts posted by FredM


  1. Can someone please post a simple script that creates and extrudes a basic rectangle? I think that'd be a good place for me to begin to understand the structuring aspect of scripting. Also Is there a dictionary-type layout of all of the commands somewhere out there? Thanks.


  2. I have had one instance with the total loss of a file. I was creating many, many symbols and building a library. Names costs etc. saving every 3-5 minutes. At one point, the program began giving me strange error messages like 'duplicate symbol name; please choose another name' type of error, so I quit vw then re-opened and found that the file was totally gone. Corrupted and not recognized by vw, I went to file info and it had 0k for file size.. I was'nt happy. I believe that something in the mass symbol creation and quick, repetitive saving overloaded vectorworks's brain. But that's just what I believe. Hope this helps in some strange way.


  3. Hi All, I am curious as to the most realistic looking way to draw fabric, lets say a sheet thrown over an end table. I recently had to draw an 8' diameter table top with a table throw over it. It looked alright, but not realistic enough for me. Thanks.


  4. I've had an issue where I was building a symbol library and after 40 to 50 symbols, and saving every 3-5 minutes, the file saved at 0k. and all was lost. I was pissed. save.....good, save.....good, save......good, save......not good..... don't know if that helps, but thought it was relevant.


  5. My question about the bug reports is when someone reports one, do they just hold their breath for months and hope for an update with it fixed? I am not sure how that works. At least with posting the issue you get multiple responses on the bug at hand, and possibly an easy solution. Just the 'submit the report and don't expect a response' does not sit well with me. At least with posting an issue, you get feedback. Either good or bad it is feedback.


  6. should a rounded rectangle with a radius of zero NOT be considerd a rectangle???? If I was creating a program, would I not try to eliminate ALL immediate shutdown's of the program I was trying to sell??? Are you an employee of VW or are you Adolf Hitler???? You seem to not see the common problem in the fact that VW disappears ,,,,Like you>>>>.....


  7. Thanks All. The name's Fred. Never heard of anyone called 'not Fred' either smile.gif I think I am going to post in the wishlist section. One way I've thought of that might work,without an extra program, is make the OIP mouse sensitive. When you move the mouse cursor over any part of the OIP it is activated and ready for insert. Then you can type your info in and when you move the mouse away it is de-selected. Possibly an OIP preferences check box or something like that.


  8. Alright. let's say that I enter a symbol and it appears in the drawing at z=0. I want to move it to z=48 so I do; now I hit the x key to get the 2d selection tool (or any other tool for that matter) and I am still in the OIP. I have to hit escape to get out. I know it's small, but when you are in a hurry, grrrrrrr. Are there any suggestions out there?


  9. Would'nt it be nice if 'creation failed due to invalid path or profile objects' fail message continued with 'try loft with one rail'. I created in plan view a u shaped 2d poly, converted to nurbs; moved vertices to desired elevation; changed to front view; drew 2d rectangle and a circle; tried rectangle...fail. tried circle success. go figure.


  10. I don't do many mouldings, but when I do, here's how I do it. Create moulding profile in 2d extrude along path create 2d desired angle extrude and subtract solids. Then mirror and duplicate along the newly formed angle. It is not the best way, but it works for me.

 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...