Jump to content
  • Sign in to follow this  

    Connecting Compulite VectorPC to Vision 2.3PC via Art-Net


    PVA - Jim

    There are a few things you need to know in order to properly configure the Compulite VectorPC offline editor for it to work properly with ESP Vision. 

    This discussion is valid for the following configurations: 

    Computlite VectorPC to Vision 3 MAC (different computers) 
    Computlite VectorPC to Vision 2.3 PC (different computers)
    Computlite VectorPC to Vision 2.3 PC (same computer)


    CONFIGURE Compulite VectorPC SOFTWARE

    Step 1: After launching Compulite VectorPC software, click on the tools button. Then go to Settings.

    compulite_tools.jpg


    Step 2: Click on the DMX Protocols tab on the menu bar.



    compulite_dmxprotocols.jpg


    Step 3: Uncheck the VC boxes. Then check the Art-Net boxes. After doing so, Click on the Art-Net button on the right to run Art. The Art-Net Subnet should then display a zero. Now click apply and ok. 


    compulite_artnet.jpg



    Now, you should be able to patch your show (or load an existing show), and you should be good to go.

    Step 4: Now launch ESP Vision, then click on the DMX in the menubar...Select Change DMX Provider...Change the provider to Art_Net.

     

    vision_artnet.jpg

    Edited by JimW



      Report Article
    Sign in to follow this  


    User Feedback


    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...