Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Seems like plenty of work-arounds. Here's another - and what I ended up doing: Use batch rename to prefix all of my classes in my target document. Copy and paste in place from source document to target document. Batch rename to prefix imported classes and objects. Remove the prefix from my original set of classes. Begin the sorting process.
  3. Of course it works as expected now. Vectorworks relaunch solved it. 😄 / ☹️
  4. Hmmm Vectorworks is up to date. Here's how things function for me currently:
  5. Today
  6. @Pat Stanford you are correct, the object had a line style of none, changed it to solid and it solved it.
  7. The Stakes are independent objects, so will not disappear when you are looking at the proposed model. However, if you have set them to be Existing, this simply means that they contain levels that should set the level for the Existing site. So, any elevation changes will not be included in the cut and fill calculation. You should always enclose site modifiers (Stakes or other) within a Grade Limit. You don't need one for each stake - just draw a single grade limit that encloses the whole site, and set this also to relate to the Existing site. The Grade Limit is a mode of the Site Modifiers tool. All modifiers should be enclosed within a Grade Limit, but they can all be enclosed by the same grade limit. You might find the following free training on Vectorworks University useful. The Site Design course includes a section on Site Modelling.
  8. I have exported a model file as a .rvt file which, although it hung for a while during the process, seems to have worked. However, when I try to re-import it to see what it looks like, Vectorworks, just freezes after about 19%, with the 'not responding' message and I have to force quit... I've attached the file so if someone else could try to see if they have the same issue, or advise what the problem might be.. Cheers 1187 Library Master rev.rvt
  9. fabrica

    Data tag help

    I cannot figure out how to get the size of a steel (wide flange 3D) into a new data tag , looking to make a simple tag with steel size and length ? Can get the length ok but not the size (ie. the 203 x 203 x 46 part)
  10. Haa!! Yep, I'm a muppet... sorted now. Don't know what was going through my head. Jazz
  11. Yeah, no it doesn't... I've just realised what I've done.... I'm a moron!
  12. They probably aren't inserted into the wall. When you have one selected does it say Door in Wall at the top of the Object Info Palette (OIP).
  13. Hi all, I'm working on a theatre model and I've added doors into the walls, where they should be, but for some reason it hasn't 'hollowed' out the wall. The door is there no problem, opens in 3D but alas... so is the wall.... I've not had this issue before so a touch stumped. I've tried playing with settings but totally missing something! Any ideas? Thanks, Jazz
  14. Thanks, Pat. Will tee this one up later today!
  15. Thank you for this - very kind of you! I've set it up (I'm currently on 2018) It works perfectly when I'm within a group - which is great. This will be very useful. When I run it outside of a group though I find that it first changes the projection to perspective, but I have to run it a second time to get it to change to OpenGL. This is not too much of a big deal as it's quite easy to just hit the shortcut button twice. Would it be straightforward to make it change the view as well? If it could also change to, say, left isometric that would be really helpful. I don't atually mind which direction the view is; what's more important is that I can see what's going on in 3d, and I can then easily fly around to the angle I want, if it's different.
  16. Im using the RTX2070 but no bubble pops up. If you are not sure whether Vectorworks uses the right graphics card, you can check this in the Task Manager. There you can easily see if the workload of the graphics card increases when using Vectorworks. You may have to force the graphics card to be used for Vectorworks in the graphics card driver. This works the same way with Quadros as with Geforce graphics cards.When youre not sure if vectorworks uses the correct cpu, you can look in your task-manager
  17. Well a promise is a promise! On a more practical side, here is a consolidated list of suggestions for anyone looking in the future (shout me if I missed any). Selection Tool (X) Double Click Paste in Place Escape (x2) to exit text editing etc. Move by Points Undo / Redo Open GL (and other render mode options) cmd-[ and cmd-] (previous and next layers etc.) Activate class Flyover mode Camera (top down plan, perspectives, etc.) Zoom to Objects / page area Toggle mode (left, right) Duplicate Array Select Similar Find and modify
    Mine is the vw2019 version. Why can't I open it? Is it because the files are too low?
  18. Mine is the vw2019 version. Why can't I open it? Is it because the files are too low?
  19. Hi Steve Yes, if the Plant is based on a polyline (in other words, you converted it with Poly-vertex mode active in the Plant tool, then you have two options: Double-click the plant and choose to edit the Path - this actually activates the Reshape tool, and you can then reshape the polyline as you wish. When you exit this edit mode (but orange button, top-right of the edit window), the Plant will regenerate. Simply click the Reshape tool, and then click on the Plant. Reshape as desired. The Plant will regenerate.
  20. HGVW

    HazelG

    Perfect, thank you both. I had been using the duplicate along path for rectangles, but then they don't follow the actual curvature of the line so these are great solutions. Also happy for my first post and to have such quick and helpful responses - thanks 🙂
  21. I have set up a data tag to number sequentially a set of objects. I would like to reverse the order of the numbering using the manage sequence function. In theory this seems relatively intuitive and changing the sequence to -1 will renumber the tags in reverse. Sadly the numbers become 05, 04, 03.... rather than 5, 4, 3... However, when I go to manage the sequence again, the programme crashes - I am sure as a result of the negative sequence I set up. So the question is: Is there a way to reverse a number sequence that avoids renumbering manually? Thanks
  22. Thank You Pat, this is exactly what I need ! ! 😀😀😀
  23. Thanks for the update, I'll get a bug report in the system and make sure the engineering team get your demo file
  24. http://whistleralley.com/tangents/tangents.htm
  25. I am having trouble with plant paths in a file using create object from shape command (plant from polyline in this instance). I am using polyline polyline to create a curved hedge row. Is there a way to edit the hedge row with a bezier path? This would be much easier than having to edit the polyline and re-convert to a plant.
  26. Heya Team, I am trying to create a layer filled with symbol insert wrappers. I have got it working but it always inserts the symbol on the same layer the wrapper is on, where do I place the command to tell the wrapper which layer to send that symbol to? Thanks in Advance!
  1. Load more activity

 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...