Flavie Posted April 25, 2022 Share Posted April 25, 2022 hi, im trying to plan my focus, and some of my lamps focus on a 45 angle degree. i played with the field and beam angle without any success, any ideas ? Quote Link to comment
markdd Posted April 25, 2022 Share Posted April 25, 2022 Is it the elongated shape you are worried about or the Rotation of the beam? Quote Link to comment
Flavie Posted April 25, 2022 Author Share Posted April 25, 2022 the rotation of the beam ! i want it 90 degrees in this case Quote Link to comment
markdd Posted April 25, 2022 Share Posted April 25, 2022 If the Focus Point is directly under the Lighting Device then the Beam should be aligned correctly. However, if it is slightly un aligned then the focus can become un-rotated. To return it to where you need it to be then use the Lamp Rotation Angle field and you can rotate it to any angle you want. Quote Link to comment
markdd Posted April 25, 2022 Share Posted April 25, 2022 Another way to change the shape of the beam is to adjust the Beam Angles. Just swap around the values of Beam 1 with Beam 2 ; and Field 1 and Field 2. Quote Link to comment
Flavie Posted April 26, 2022 Author Share Posted April 26, 2022 i'll try this thank you! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.