halfcoupler Posted February 17, 2022 Share Posted February 17, 2022 - there is a symbol in a drawing called "symbol_abc". - This symbol has a record attached called "Recordformat123". This has a "Field_A" value "5555". - there is a revised version of this symbol with revised geometry somewhere in my library. - this symbol is also called "symbol_abc" - it has a record attached also called "Recordformat123", but this has a "Field_A" value "8844". Now I'm replacing (via the replace button) "symbol_abc" in my drawing with the "symbol-abc" in my library. I am expexting symbol AND Record value to be replaced, but the geometry is replaced while the record is kept. I'm getting the revised new geometry with old "Field_A" value "5555". ok,- that could be a rule,- BUT: Now I'm replacing "symbol_abc" with "some_symbol_with_other_name" first. Then I replace "some_symbol_with_other_name" with the revised version "symbol_abc" from my library. Result: The revised "symbol_abc" replaces geometry AND Record value, so I got what I originally wanted: New geometry and new "Field_A" value "8844". It seems that the replacement button works different, dependig on the symbol name being identical or not. Bug or feature ? Or maybe someone here can explain me the logic behind this ? (tested with VW2021,- not tested with VW2022) 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.