Bruce Kieffer Posted September 18, 2021 Share Posted September 18, 2021 Don't get me wrong, I am fine with this, but now I need to know how do I make my worksheet show face on in views other than TP and Top? Quote Link to comment
0 Bruce Kieffer Posted September 23, 2021 Author Share Posted September 23, 2021 The 7 minutes ago, mjm said: Ok. But this is what I'm seein in 2021… A standard Right View, that worksheet, pasted into the 3d view and staged as appropriate is still editable via double click, which then updates the actual hanging schedule below. Does that address your concern? This thread is referencing Vectorworks 2022. Things have changed. Quote Link to comment
0 mjm Posted September 23, 2021 Share Posted September 23, 2021 1 minute ago, Bruce Kieffer said: The This thread is referencing Vectorworks 2022. Things have changed. Ah. a thousand pardons… 1 Quote Link to comment
0 mjm Posted September 23, 2021 Share Posted September 23, 2021 6 minutes ago, mjm said: Ah. a thousand pardons… & but here's a quickie in 2022. Is this the behavior you're after? copy, paste, rotate. Quote Link to comment
0 Jesse Cogswell Posted September 23, 2021 Share Posted September 23, 2021 @mjm My understanding of Bruce's issue is that while you can do this (or use the fancy new Align Working Plane to Current View button in a 3D view before placing the worksheet), it would only every work for that view, versus having it on the screen plane and always facing the camera while you orbit around the drawing. Personally, I would just have the worksheet open in its edit view and would only place it either directly on a sheet layer, or within an annotation of a viewport, both of which can ONLY be on the screen plane, so there's no need to have a way to toggle it. 1 Quote Link to comment
0 Bruce Kieffer Posted September 23, 2021 Author Share Posted September 23, 2021 (edited) 17 minutes ago, Jesse Cogswell said: @mjm My understanding of Bruce's issue is that while you can do this (or use the fancy new Align Working Plane to Current View button in a 3D view before placing the worksheet), it would only every work for that view, versus having it on the screen plane and always facing the camera while you orbit around the drawing. Personally, I would just have the worksheet open in its edit view and would only place it either directly on a sheet layer, or within an annotation of a viewport, both of which can ONLY be on the screen plane, so there's no need to have a way to toggle it. Yep. I have not had much time to experiment, but there is a solution I am sure. It's just going to be different than how I did it in 2021. Edited September 23, 2021 by Bruce Kieffer 3 Quote Link to comment
0 zoomer Posted September 23, 2021 Share Posted September 23, 2021 7 hours ago, Bruce Kieffer said: Sure, and that is what I did too, but it doesn't work now. Ahm, what's wrong with re-activating the 2D legacy option for new files, or just go on using Screen Plane for all files that already contain screen plane assigned objects ? The new VW 2022 pink "screen plane" is just a temporary drawing aid as it is now.. 1 Quote Link to comment
0 Bruce Kieffer Posted September 23, 2021 Author Share Posted September 23, 2021 (edited) 18 hours ago, zoomer said: Ahm, what's wrong with re-activating the 2D legacy option for new files, or just go on using Screen Plane for all files that already contain screen plane assigned objects ? Nothing, but Vectorworks push is away from screen plane, and that may mean that it goes away completely in the future. When I think more about my situation, having my cut list worksheet on my design layer only serves me when I am "validating" the worksheet entries. I had to find another way to print the worksheet. So ultimately I will save time and work by using a solution that puts my worksheet on a sheet layer and view it in a split pane setup. Then it will be easy to print it when that time comes. Edited September 24, 2021 by Bruce Kieffer Quote Link to comment
0 zoomer Posted September 23, 2021 Share Posted September 23, 2021 5 minutes ago, Bruce Kieffer said: Nothing, but Vectorworks's push is away from screen plane, and that may mean that it goes away completely in the future. Got it. Yes I remember Unified View OFF was mainly used to Print and create Plans from DL. But I don't think that 2D legacy will disappear that soon. Why, it does not disturb by itself, just when you have a hidden legacy element somewhere in your File 🙂 8 minutes ago, Bruce Kieffer said: When I think more about my situation, having my cut list worksheet on my design layer only serves me when I am "validating" the worksheet entries. I had to find another way to print the worksheet. I think Printing the table from SLVP is no big problem or inconvenient. But checking your worksheet while drawing/modeling without screen plane would need to temporarily switch to Top Plan View from time to time. Quote Link to comment
0 Bruce Kieffer Posted September 24, 2021 Author Share Posted September 24, 2021 (edited) I messed around with this some more today. I'm convinced that the best solution is using Multiple View Planes. It's easy to set up with my worksheet on a sheet layer, easy to turn the panes view on and off, I could create a floating window and place that on my second monitor, and it is easy to print. It solves a lot of the issues I had with the worksheet on my design layer. I feel like I retired my fax machine and 8-track player all at the same time! Here's what it looks like: Edited September 24, 2021 by Bruce Kieffer 4 Quote Link to comment
0 Kevin McAllister Posted September 24, 2021 Share Posted September 24, 2021 On 9/22/2021 at 8:32 AM, Andy Broomell said: f you're actively working on the worksheet while modeling, I'd suggest deleting the Worksheet Data object, and instead going to the Resource Manager, right clicking the Worksheet thumbnail, and choosing Open. Then you'll have the worksheet editor without it being an object in the drawing. You can also click the little "+" icon to minimize this window whenever it's in the way, but allowing it to stay accessible. Immediately after multiview panes were introduced I added a wishlist item to allow things like worksheets, script palettes, the script editor etc. to be docked into the workspace as a pane........ clearly this needed even moreso now. Kevin 1 Quote Link to comment
0 Kevin McAllister Posted September 24, 2021 Share Posted September 24, 2021 14 minutes ago, Bruce Kieffer said: Looks like a good interim solution! Kevin 1 Quote Link to comment
0 mjm Posted September 24, 2021 Share Posted September 24, 2021 15 hours ago, Bruce Kieffer said: I messed around with this some more today. I'm convinced that the best solution is using Multiple View Planes. It's easy to set up with my worksheet on a sheet layer, easy to turn the panes view on and off, I could create a floating window and place that on my second monitor, and it is easy to print. It solves a lot of the issues I had with the worksheet on my design layer. I feel like I retired my fax machine and 8-track player all at the same time! Here's what it looks like: Awesome solution! Quote Link to comment
0 willofmaine Posted June 15, 2022 Share Posted June 15, 2022 On 9/22/2021 at 12:15 PM, Andy Broomell said: -and lastly and most important to me personally, is the deprecation of Cropped Perspective view (this should be solved by fixing the RW Camera tool's useless blue corner crop marks and making cameras cropped by default like any other respectable software). Cinema 4D handles this perfectly - a shaded rectangular border which you can set the opacity of under preferences. I'm finally getting going with VW 2022, and I've just realized that "Cropped Perspective" has fallen victim to the (mostly welcome) "removal" of Screen Plane. It's bad enough that I originally had to seek out "Cropped Perspective" (why wasn't it the default??) so that I could frame my camera views. The blue corner crop marks are indeed useless; beyond useless. Am I missing something, or do we really, still, after 9 months and with SP3.1, not have a way to frame and compose perspectives??? VWIS233 Quote Link to comment
0 MarcelP102 Posted June 15, 2022 Share Posted June 15, 2022 (edited) @willofmaine 1. In perspective view click this button 2. And than draw shape and use that to create a cropped viewport Does this help? Edited June 15, 2022 by MarcelP102 Quote Link to comment
0 Tom W. Posted June 15, 2022 Share Posted June 15, 2022 5 minutes ago, MarcelP102 said: @willofmaine 1. In perspective view click this button 2. And than draw shape and use that to create a cropped viewport Does this help? Not quite the same thing. Cropped Perspective clips the view to match the Camera view so allows you to see what will end up in a camera-generated VP. Otherwise you're limited to using the blue viewfinder markers which as pointed out are somewhat inadequate to put it politely 1 Quote Link to comment
0 Andy Broomell Posted June 15, 2022 Share Posted June 15, 2022 Right, we're talking about needing a cropped view while in the Design Layer, allowing you to see what the camera sees and still navigate within your model. Nothing to do with viewports. On that note, please upvote this topic: I was coincidentally nudging this in front of someone just yesterday. Quote Link to comment
0 willofmaine Posted June 15, 2022 Share Posted June 15, 2022 @MarcelP102 ... Thank you for the suggestions, but, as Tom & Andy say... 1 Quote Link to comment
Question
Bruce Kieffer
Don't get me wrong, I am fine with this, but now I need to know how do I make my worksheet show face on in views other than TP and Top?
Link to comment
42 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.