Jump to content
Sign in to follow this  

print problems

Recommended Posts

The current file is not sending all the info to the printer. A previous file is fine, and it sends the info over in regular increments (eg. 10%, 22%, 33%, etc). The current file gets to 22% and thats all, the design prints only that portion of the info. ???? I have printed about 40 designs, this has happened to about 3. In the past I was able to change paper size and print the design out in segments. My plotter is an HP designjet 100.

Share this post

Link to post

Are you using print spooling? If so, it may be worth creating a copy of your printer but with the spooling option off - it is under the ports tab. It is possible that for larger print requirements you are running out of memory to hold the spooled data and the print just gives up. You could temporarily turn off print spooling on your current printer to test this theory this out first.

Having spooling turned off means that the print command does not return control back to you until it has physically finished printing the whole document, which is often not ideal, but for me, it got me printing large A3 jobs on my HP deskjet 9670.


Share this post

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  


7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114


© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

  • Create New...