Jump to content
lylealmond

VW Landmark Essentials Site Model Issue

Recommended Posts

I seem to have gotten lost somewhere in the last section of the VW Site Design Essentials Seminar, when the Essentials Template #3 is being used. When I raise the elevation of the back patio and pool surround to meet the 3.65' elevation of the house (minus 4" below the sill), and the site model is then changed from 'Existing' to 'Proposed' to raise the terrain model so that the patio and pool surround hardscape are no longer hanging in space, I lose almost all of my perennials, shrubs, and bury the trunks of my trees…

 

image.thumb.png.891445c8b677a4ef7c85af65c6626d5e.png

 

…as well as part of the driveway. As you can see, I've regraded the driveway according to the coordinates that were given in the seminar, but part of the drive is now below grade.

image.thumb.png.a12fb892421314b314f33615798c8b62.png

 

Below, you can see the floating hardscape in the back after raising it 3.65'-4" and before raising the site model from 'Existing to Proposed'.

image.thumb.png.63541704f4e8b39e3e781dbe7e4611c4.png

However, even when changing the site model back to 'Existing', my plants and driveway still fall below grade. I'm not sure how to fix this.

 

image.thumb.png.aa0b436a61124b0af378778ebefc031c.png

Perennials, shrubs, and trees before creating the site model

 

image.thumb.png.cec42e55a31ded2a01f6ac932b35d92e.png

Perennials, shrubs, and trees after creating the site model

 

image.thumb.png.d30e3b490ee04d2e4a7b07e557c16d19.png

A section of a planting bed with and without the site model in place.

 

I've created the site model from source data based on the staked elevation points given in the tutorial file (Essential Template #3, applying Site Modifiers to both All Layers and on Select Layers choosing all the layers including perennials, shrubs, and trees. In both cases, my plants (and parts of the driveway) are getting buried under the site model surface.  

 

Noticeably, the house was floating above the ground prior to creating the site model and was at grade after the site model was created. But everything that wasn't tied in with the house's elevation got buried.

 

I'm sure this is a common problem with beginners. Can anyone tell me how to correct this problem?

 

Thank you.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...