Jump to content
  • 0

problem importing multiple design layers


Cadplan Architecture

Question

2 answers to this question

Recommended Posts

  • 0

You can do this using the Create New Design Layer workflow.

  • Rather than selecting Create New Design Layer, select Import Design Layers instead. 
  • You can then navigate to the file and select the layer/s you want to import.
  • Check Import Layer objects and you should be fine.

1265677609_Screenshot2021-05-27at08_32_17.thumb.png.4c5b217ab2c6cee6d6bfd7cf19afbec4.png

 

Do it one layer at a time and save after each import. Then hopefully if you have a crash, you will be able to get a better idea of what may be causing the problems.

 

 

Link to comment
  • 0
53 minutes ago, markdd said:

You can do this using the Create New Design Layer workflow.

  • Rather than selecting Create New Design Layer, select Import Design Layers instead. 
  • You can then navigate to the file and select the layer/s you want to import.
  • Check Import Layer objects and you should be fine.

1265677609_Screenshot2021-05-27at08_32_17.thumb.png.4c5b217ab2c6cee6d6bfd7cf19afbec4.png

 

Do it one layer at a time and save after each import. Then hopefully if you have a crash, you will be able to get a better idea of what may be causing the problems.

 

 

Thanks, that’s the procedure that I always use, I’ll try and see if two will import at the same time.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...