napwszzm Posted April 19, 2021 Share Posted April 19, 2021 Hello, I am new to Interiorcad, so can someone show me how to make drilling grid working properly. Currently I am modeling some kitchen units that using screws to joint the units. When I applied the drilling grids and changed the cabinet dimensions, the quantity and the position of the drillings is not changing properly. I have attached the picture for the problem here: 1. First, I applied the connector and drilling grid that supplied Interiorcad (I did not change anything on drilling position), and made a 720h x 560d x 600 sample box, 2. I changed the cabinet size to 900x 800 x600, the drillings then are at wrong place. I tried different drilling grids, it seems the problem is still there. Can someone tell me how to apply the drilling grid properly? Thanks a lot. Nap Quote Link to comment
Marcel Ostendorf Posted April 19, 2021 Share Posted April 19, 2021 Hi Nap, am I right assuming that you edited the screw you are using and that it has only one drilling? Screws always need two machinings. See our FAQ for help: https://en.extragroup.de/faq/ 1 Quote Link to comment
Vectorworks, Inc Employee Stephan Moenninghoff Posted April 19, 2021 Vectorworks, Inc Employee Share Posted April 19, 2021 (edited) Thanks, @Marcel Ostendorf for chipping in! Here's the direct link to the FAQ: https://en.extragroup.de/question/why-do-some-of-my-own-custom-screws-change-position-when-a-cabinet-is-reshaped/ Edited April 19, 2021 by Stephan Moenninghoff 1 Quote Link to comment
napwszzm Posted April 19, 2021 Author Share Posted April 19, 2021 Hi @Marcel Ostendorf and @Stephan Moenninghoff, Thanks a lot for the information. I checked the sample screw, I think I did remove the 4mm drilling. Now, I apply the new screw in the library, and the problem solved. Thanks again for your help. 😀 Regards, Nap Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.