Jump to content

Log cabins - hints needed!


Recommended Posts

I never thought I would do a log construction, but life is strange indeed.

Can anyone give hints of the best modeling approach? I'm afraid I need line drawing type elevations as well as rendered images.

I am thinking of writing a PIO, but I'd rather not as I hope this won't happen again so other techniques are preferable. It is not a huge project - some 350 sqm gross floor area - and I don't need to worry about working drawings as an old-fashioned drawingboard person will be engaged to do those.

Link to comment

Interesting! Here's what I would do: Make a log from an extruded circle of the appropriate diameter. Color or texture it (maybe with a light wood-ish texture). Then in alternating plan & front views you can duplicate, rotate 90?. move up and stretch longer or shorter for the first and second course of logs. Don't worry about the notches or overlaps as these ought to appear OK just by superimposing logs on one another. Then select and group and duplicate for the rest of the wall height. For a real 3-d model you will need to stop and start the logs at door & window openings, but for simple frontal views you could probably get away with just placing doors & windows in front. On the other hand you might check the Texture suppliers to see if they have "log".Let me know how this progresses!!! PLC

Link to comment

PLC, Chris,

Thanks for the hints. You verified my worst fear: that there is no easy way.

Well, this morning I wrote a crude log wall PIO which may eventually find its way to VectorDepot.

As comes to window openings, a PIO can be used in a solid subtraction to punch a hole in the log wall. The 2D view is lost, of course, but is 'recoverable' by ungrouping, so I can produce reasonable plans & elevations/perspectives, from two separate layers (not really an ideal 'design' solution. but I can live it for one project.)

Fortunately, I don't need much detail. Basic round logs, although theoretically unsatisfactory, are fine for this exercise. Having a real log profile with all the details (don't ask more - I haven't done a log building in 25 years and the last ones were in a different language! No idea what the things are acalled in English!) appears to be quite an exercise.

Oddly enough, on the VectorScript mailing list, someone today wanted hints on using components of a symbol definition to be used in a PIO - which was what I thought to use to get a better representation of the log profile.

Link to comment

A simple solution?In theory at least. First draw the walls using the wall tool. "install" and record sizes & positions of doors and windows. Centre the logs over the walls[which must be narrow enough to not show thru the logs]: then use the Subtract Solids tool to reveal the doors and windows. Comments?

Link to comment
  • Vectorworks, Inc Employee

quote:

Originally posted by Garry Dreger:
In theory------Unfortunately, It is not possible to combine Extruded circles [logs] into a solid; the"Add solid" tool.

Why not? I have not heard of any problems adding extruded circles together.

You probably actually want to extrude a circle whose top and bottom have been flattened, rather than a true circle.

Link to comment

Official or not, you're right. I've just now tried to make a hole in a log wall using my original idea,[ adding and subtract ing solids],and it worked. What I was doing wrong before, I'll never know.

So, the "simple" solution will work. The major drawback of this method is when changing the locations or deleting doors and windows,you would be left with a hole in the wall, which I suppose would require replacing the whole wall and starting over. Not a simple solution.

I have posted a "wish" for the addition of a couple of new "wall styles".

Thanks Andrew, for your input. Nothing like someone who knows what they're doing.I am still in the " trying to know " stage.

Link to comment
  • 18 years later...

Ok - a little nerdy but this should get you close.

 

Draw Walls

Model the walls as unstyled walls full width of the logs. eg 8"

Insert doors & windows etc as normal

 

Create Logs

AEC>Framing>Wall Framing

Create a new Framing Lumber eg 8" x 8"

Set the Sheet Stock Height to eg 8.5" this will give a .5" horizontal gap

Now you can delete the unnecessary studs & plates - Push/Pull the logs at the corners to suit.

3d Modelling Toolset>Fillet edge - eg 4"

Select Edges to round your logs.

 

Duplicate doors & windows so you can turn off walls.

With Wall Insertion mode turned off select all doors and windows, Copy, Paste In Place

Set the class of the walls to be invisible.

 

  • Like 1
Link to comment

Thank you for your reply.  Unfortunately, I only have Landmark and I don't have the framing tool so will be looking for a work around. Was hoping to be able to clip the windows and doors through a log symbol but that doesn't seem to work. Also tried creating the logs with the wall projection tool but that won't allow me to extend the logs the full length of the walls and beyond.

Link to comment
On 5/5/2002 at 6:42 PM, Garry Dreger said:

A simple solution?In theory at least. First draw the walls using the wall tool. "install" and record sizes & positions of doors and windows. Centre the logs over the walls[which must be narrow enough to not show thru the logs]: then use the Subtract Solids tool to reveal the doors and windows. Comments?


Until Vw gets Stacked Wall Components (rumored to be in the development pipeline, but not as part of the upcoming Vw2021, so who knows when), I think the above “simple” solution from 2002 is the current, best approach.
 

You can start with a log symbol to make things easier, but when you want to make the holes for Doors / Windows with the Subtract Solids command you’ll need to convert the log symbols to a group first. Then direct model the ends of the logs with the Push / Pull tool as needed.

Link to comment

Thanks rDesign. I used the framing member tool instead of the symbol option to make my log and then followed the above.  I was not able to use the window itself to subtract solids with for some reason.  I had to make a cutout sized to the window and use that. Also was not able to group a stack of logs and use the subtract solids tool.  Wondering if either of these things is a glitch in my system or a flaw in my steps.  Either way, I did get something to work though more time consuming than I'd hoped for.  

Link to comment

We recently did a series of log houses constructed with half-logs hung on a standard 2x8 stud wall.  We put a log texture on the face of a 5" thick exterior component.  We had to offset the side elevation texture to account for the lapping of the logs as they turned the corners.  Custom corner log symbols showed the full round ends of the logs while other elements like log brackets and fully modeled gable log trusses assisted in hiding the lack of depth in the wall texture.  We used window and door symbols with custom hole cuts and splayed edges to achieve the log recess.   We had to 2D mask overlay the flat faced wall in the details with actual half log profiles.  This wasn't perfect if your intent is photo-realism but it worked very well for CD production with model generated elevations.

Link to comment
11 hours ago, Joe-SA said:

We recently did a series of log houses constructed with half-logs hung on a standard 2x8 stud wall.  We put a log texture on the face of a 5" thick exterior component.  We had to offset the side elevation texture to account for the lapping of the logs as they turned the corners.  Custom corner log symbols showed the full round ends of the logs while other elements like log brackets and fully modeled gable log trusses assisted in hiding the lack of depth in the wall texture.  

 

   If you don't mind sharing a few images, I'd love to see how this turned out.

Link to comment
  • 3 weeks later...

So as there are no slanted Walls,

one could work with a very thick Wall and cutting Geometry.

Windows a inserted (rotated) Symbols to make them following the Wall slope, .....

 

Would be a bit laborious with rounded Walls though.

Not to mention Walls that should follow B-Splines 🙂

  • Like 1
Link to comment
  • Vectorworks, Inc Employee
2 hours ago, zoomer said:

So as there are no slanted Walls,

one could work with a very thick Wall and cutting Geometry.

Windows a inserted (rotated) Symbols to make them following the Wall slope, .....


Certainly a possibility!  I’m thinking wall joins could get hairy though. 😉 

 

2 hours ago, zoomer said:

Would be a bit laborious with rounded Walls though.

 

True, But still a possibility!

 

2 hours ago, zoomer said:

Not to mention Walls that should follow B-Splines 🙂

 

Well now you’re putting the cart before the horse!  😛 

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...