Thomas K. Posted February 17, 2021 Share Posted February 17, 2021 (edited) Good morning actually not a real problem, but a workflow that I would like to keep. Experimental setup: One building has 20 rooms. Each room should be equipped identically. As an example, we then have 20 rooms with one display, one LAN switch and three AVoIP devices. The switch is integrated into the overall network structure of the building. In order to be able to assign a room to each device in ConnectCad, ALL devices (i.e. all AVoIP devices) would have to be individually numbered and then located as equipment in the rack elevation. But that is not what I want. Due to the room id, all devices are clearly assigned and i want them to be numbered 1-3 like the AVoIP devices. Unfortunately, an additional database cannot be included in the evaluation of the circuits. Has someone happened to solve this task? Edited February 17, 2021 by Kelzilla1000 Quote Link to comment
Daniel Dickman Posted February 18, 2021 Share Posted February 18, 2021 I've run into a similar issue where I needed unique names and still wanted to repeat numbering in certain locations. My fix has been to add a location identifier into the device name. So your device names could look something like... '"Room1 - AVoIP 1" "Room1 - AVoIP 2" "Room1 - AVoIP 3" "Room2 - AVoIP 1" "Room2 - AVoIP 2" "Room2 - AVoIP 3" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.