Landartma Posted February 12, 2021 Share Posted February 12, 2021 I have a relatively small flat site that's getting a pretty simple design build program. I am working off of spot grades. My 2d work is just about done. What's the best method to show grading. Site modeling seems a bit overkill. Or is the grading tool the way to go. Quote Link to comment
Vectorworks, Inc Employee Tony Kostreski Posted February 12, 2021 Vectorworks, Inc Employee Share Posted February 12, 2021 Hey @Landartma -- If all you really need for this project is to show significant spot elevations & slopes, I would suggest using the stake object for individual spot elevations and the grade tool for slopes. Just make sure you are using the appropriate settings. The Stake Object (spot elevation) has a mode for "Use as 2D/3D graphic only" then you can input the height in the "Z" Elevation. The Grade Tool has a mode for "Use Grade Object Heights". Hope this helps! Tony 2 Quote Link to comment
Landartma Posted February 13, 2021 Author Share Posted February 13, 2021 Thanks Tony! I was trying the stake tool and could not get it to work. I must have had the workflow wrong. I was placing spots where I wanted them then went back and tried to edit the grade in the OIP but it didn't work. So I started over. In 2021 (maybe earlier versions too) all you need to do is activate the tool type in the elevation on the tool bar right next to the wrench and pencil and place it on the plan then enter the next and place place it and so on. Is that the most effective way to do it? Not sure how I missed that one when working with it originally but I messed with it watched a bunch of videos and finally dawn broke. I see a couple errors I made with my elecations. Can those grades be edited in the OIP to change the grade and update the site model. I want to change the highlighted grade to from 99 to 100. Whats the path? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.