Mark Fleming Posted November 15, 2004 Share Posted November 15, 2004 What does misc. error 20, 2 mean? I get it using Landmark to Site Model from the Grid Method. I have 49 grid points entered Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted November 15, 2004 Vectorworks, Inc Employee Share Posted November 15, 2004 Look at the 3D data produced by the Grid Method. Make sure you don't have duplicate data points. Quote Link to comment
Mark Fleming Posted November 15, 2004 Author Share Posted November 15, 2004 meaning no two data points have the same value or that data points are doubled for a given point? Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted November 15, 2004 Vectorworks, Inc Employee Share Posted November 15, 2004 Well, it's the same thing, no? At least, if by "value", you mean x,y,z.... Quote Link to comment
Mark Fleming Posted November 15, 2004 Author Share Posted November 15, 2004 I got it, I have 49 points and none have the same xyz value, so now what? Quote Link to comment
Mark Fleming Posted November 15, 2004 Author Share Posted November 15, 2004 I also get the same misc. error 20, 2 when I run "check 3d polys" on the Mod-site-DTMdata layer - but I count (the computer counts) only 49 points of my 7 X 7 grid? Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted November 15, 2004 Vectorworks, Inc Employee Share Posted November 15, 2004 Do you have any site modifiers? Quote Link to comment
Mark Fleming Posted November 15, 2004 Author Share Posted November 15, 2004 none Robert, I am generating a model for the first time Quote Link to comment
Mark Fleming Posted November 15, 2004 Author Share Posted November 15, 2004 I just re entered the data by grid method in a new document and still got the error 20,1 Quote Link to comment
rwaller Posted November 17, 2004 Share Posted November 17, 2004 i got the same thing running v10 on p4. what was the conclusion to this problem.what does error code 20,2 mean? thanks. r. waller Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted November 22, 2004 Vectorworks, Inc Employee Share Posted November 22, 2004 Mark, why don't you send me a copy of your data and I'll take a look at it? mail to randerson@nemetschek.net Quote Link to comment
Mark Fleming Posted November 22, 2004 Author Share Posted November 22, 2004 Thank you - I sent the file by email Quote Link to comment
Mark Fleming Posted November 26, 2004 Author Share Posted November 26, 2004 quote: Originally posted by rwaller: i got the same thing running v10 on p4. what was the conclusion to this problem.what does error code 20,2 mean? thanks. r. waller Mark, the loci are being incorrectly classed by the Grid Entry command. It's a bug that I'll get fixed. In the meantime, simply select the 49 loci created by the command and set their class to "None". Now you should have no problem with the DTM. On Nov 22, 2004, at 10:56 AM, Mark Fleming wrote: > Robert; > > The attached file is in regards to my Landmark Win question about > misc. error 20, 1 (Nemetschek Tech Board.) > ------------ Robert F. Anderson VP Integrated Products Nemetschek North America 7150 Riverwood Drive Columbia, MD 21046 Tel: 410.290.5114 x 650 mailto:randerson@nemetschek.net Quote Link to comment
Mark Fleming Posted November 26, 2004 Author Share Posted November 26, 2004 Thanks Robert this works fine Quote Link to comment
Mark Fleming Posted December 8, 2004 Author Share Posted December 8, 2004 Greetings, I am back again with the same problem. I am generating a new DT model and even after converting all dtm points to class "none' I am getting the misc. error m,essage 20,1. Robert wrote me: "mark, I was able to get an existing site model by doing the following: 1. run Site model command 2. Click "existing + proposed" button then "existing" again 3. Click OK 4. Show your classes Looks like a bug in the handler for this dialog." I tried this and I got a single point dtm with a 0" (zero quote mark)beside it. What to try next? Quote Link to comment
Vectorworks, Inc Employee Robert Anderson Posted December 8, 2004 Vectorworks, Inc Employee Share Posted December 8, 2004 Check the maximum and minimum height ranges in your settings dialog. Quote Link to comment
Jonathan Pickup Posted December 8, 2004 Share Posted December 8, 2004 Robert, Can we have the site modeling error messages added to the VS reference, or to the on-line help somewhere? Quote Link to comment
Mark Fleming Posted December 8, 2004 Author Share Posted December 8, 2004 Robert thanks you where right about max/min elevations although this has not solved the problem. Next I will try create a site model using stake objects with elevations from the bench marks on the paper map thank you Quote Link to comment
ants Posted January 24, 2005 Share Posted January 24, 2005 To add to the issue, as I'm not too familiar with site modelling in VW I'm currently working thru VW Learning Series Landmark 11 Exercise 4 and coming to Updating Site Model after adding pad and creating fence from pad, I get same error message (... 20,1). I've repeated all steps a number of times but error reappears. What to do? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.