Joshua_Lighting Posted September 3, 2020 Share Posted September 3, 2020 Hi all, Im currently new to Vision and I’ve managed to get everything to working apart from any fixtures on universe two. I am using ETC Nomad on the same computer and I have the etc nomad licence for up to two universes. I am using vision 2020 on a student account that gives me upto four universes. I can see vision is Receiving S(acn) for all two universes in the dmx viewer window (I can fully control fixtures on u1 but no fixtures on u2). If you need anymore information please let me know. Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 Double check what the start universe is being sent in the EOS Shell this can sometimes be set to 0. Also are you using Sacn? It works better with ETC Nomad. Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 Quote Link to comment
Joshua_Lighting Posted September 4, 2020 Author Share Posted September 4, 2020 @TomWhiteLight hi Tom, I’m using Sacn, just double checked the shell settings and they are all correct. Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 In the ETC Nomad can you type (using shortkeys) (Address) 2/1 Thru 2/512 (Flash) just to check the Nomad output. Any joy? Quote Link to comment
Joshua_Lighting Posted September 4, 2020 Author Share Posted September 4, 2020 I can see the fixtures moving but no intensity just checked all the addresses and modes and they are all correct. Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 OK so this isn't a vision issue if Vision is receiving data on that universe. It could be the difference between Vision fixture mode and ETC Fixture mode. What fixture types are you using? What mode are they set to in Vectorworks? Quote Link to comment
Joshua_Lighting Posted September 4, 2020 Author Share Posted September 4, 2020 I’ve got the following X4 Martin Mac Viper Profile (basic mode) 8X GLP X4 Bar 20 (compressed 20ch mode) everything else in on u1 Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 OK great, in vectorworks under fixture mode, what are they set too? Feel free to upload the file here! Quote Link to comment
Joshua_Lighting Posted September 4, 2020 Author Share Posted September 4, 2020 One moment, vision has just crashed. 😕 Quote Link to comment
Joshua_Lighting Posted September 4, 2020 Author Share Posted September 4, 2020 The files gone corrupt. I’ll just start again, it was only a project I set myself to get used to vision. If I run into the same problems again I’ll let you know. Quote Link to comment
Vectorworks, Inc Employee TomWhiteLight Posted September 4, 2020 Vectorworks, Inc Employee Share Posted September 4, 2020 Thanks, Are you creating the file in Vision? Would be interested o see the Vectorworks File, I can send you some good links to help. I will DM you. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.