carch Posted January 11, 2006 Share Posted January 11, 2006 How can convert/transfer my custom title blocks from 11.5 to VW12. [ 01-11-2006, 08:00 AM: Message edited by: carch ] Quote Link to comment
Guest Posted January 12, 2006 Share Posted January 12, 2006 In the VW 12 Library folder is a folder called Defaults. In this folder is a variety of types of defaults. Each folder has a library file in it. The library file is the file that is used for specific defaults available to VW 12. To add all of your old custom titleblocks, simply import the symbols into the defaults library file for drawing borders. Quote Link to comment
Jonathan Pickup Posted January 12, 2006 Share Posted January 12, 2006 my suggestion is to edit the new v12 title block in the Standard Title Blocks.mcd. they have all the links to the record formats that the drawing border needs. using your old title blocks could cause problems as the links may not be the same, so when you place the title block, you can't edit the title block easily. It doesn't take long to add your log and edit the standard title blocks. Quote Link to comment
carch Posted January 19, 2006 Author Share Posted January 19, 2006 Great thanks for your help. I took one of the existing files located in the library and edit it to match our titleblocks. Works fine. I have run into one problem. It seems that there is two boarders one boarder for the page size, i e 24x36 and the other is the one i want. How do I get rid of the 24x36 board. Also when printing, our page seems to come out alittle bigger showing this 24"x36" boarder. Maybe this is the problem. thanks for your help. Chris Quote Link to comment
Jonathan Pickup Posted January 19, 2006 Share Posted January 19, 2006 You?re welcome. I haven?t really looked at the trouble with the border, but I know that there has been some discussion about the border. You can change the border settings from the Object Info Palette, but you can?t get rid of the line on the edge of the page... I wish you could. Quote Link to comment
Jonathan Pickup Posted January 19, 2006 Share Posted January 19, 2006 for those of you that need to know how to change the drawing border, I have covered this in my new VectorWorks 12 Architect manual. Quote Link to comment
rcarch Posted January 20, 2006 Share Posted January 20, 2006 quote: Originally posted by carch: I have run into one problem. It seems that there is two boarders one boarder for the page size, i e 24x36 and the other is the one i want. How do I get rid of the 24x36 board. Also when printing, our page seems to come out alittle bigger showing this 24"x36" boarder. Maybe this is the problem. Chris You can also try setting the line weights for the drawing border object to 0. The title block lines will stay intact and the border will disappear. HTH and good luck [ 01-19-2006, 07:26 PM: Message edited by: rcarch ] Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.