Jump to content

Recommended Posts

Hey All,

Very new to the entire world of vision.

I am using the ETC EOS console to control my vision file.

I have the Martin Rush Par 2 RGBW Zoom 5 channel fixture in the file

When choosing colors in EOS (by Gel color) some are close but most are way off.

Is this normal?

I used the GDTF fixture mode from the GDTF web site.

Any help would be appreciated

Thanks,

Jeff Miller

 

 

Attached is the view of L139 mixed in the fixtures (Don't think so)

Also attached is the EOS console breakdown of the color

467111048_ScreenShot2020-05-08at3_01_10PM.thumb.png.585372a59fa626bf3637631aabaf0cc4.png833854782_ScreenShot2020-05-08at3_02_06PM.thumb.png.11d47ae36c32d3dbbd49545c95edfeb7.png

 

Link to comment
  • Vectorworks, Inc Employee
On 5/8/2020 at 8:06 PM, J. Miller said:

Hey All,

Very new to the entire world of vision.

I am using the ETC EOS console to control my vision file.

I have the Martin Rush Par 2 RGBW Zoom 5 channel fixture in the file

When choosing colors in EOS (by Gel color) some are close but most are way off.

Is this normal?

I used the GDTF fixture mode from the GDTF web site.

Any help would be appreciated

Thanks,

Jeff Miller

 

 

Attached is the view of L139 mixed in the fixtures (Don't think so)

Also attached is the EOS console breakdown of the color

467111048_ScreenShot2020-05-08at3_01_10PM.thumb.png.585372a59fa626bf3637631aabaf0cc4.png833854782_ScreenShot2020-05-08at3_02_06PM.thumb.png.11d47ae36c32d3dbbd49545c95edfeb7.png

 

I have noticed issues with the Rush PARS in real life not on a visualiser. It has alot to do with fixture mode. I believe the ETC colour picker is optomised for ETC LED Chipsets. The best way to check is obtain the raw RGB values for that Lee filter and enter it as absolute data and compare. Or try out an ETC fixture alongside it. 

 

I recently preprogrammed a show using ETC Coloursource profiles and Martin Rush Pars. I had to re-do all of the colour pallattes for the rush pars only at the venue. I believe this issue was due to the ETC console.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...