Cara Pedley Posted March 11, 2020 Share Posted March 11, 2020 Does anyone have any tips on what tools/textures I should use to create a flood event scenario on my 3D site design. Or does anyone have any images to show of work that they have done for inspiration? I would like to create a rendered flood event with water in swales / rain gardens and potentially on pavements / in buildings - so I can do a series of images from a none flood event to a serious flood event. Not sure if vectorworks is capable, but is it possible to calculate the volume water in different flood events? Based on the water flooding the lower elevations first? Thanks! Quote Link to comment
herbieherb Posted March 12, 2020 Share Posted March 12, 2020 Create a simple solid for the water. Apply a water texture from the vectorworks library and make the colours a bit brownish. 1 Quote Link to comment
Benson Shaw Posted March 13, 2020 Share Posted March 13, 2020 (edited) @Cara Pedley Imagine, in a simple terrain, the flood as a rising volume or water table . The water surface will be a flat, level plane. Site elements will be evident everywhere above this level at any moment during the flood event. The water level/table will rise to different levels as the flood event progresses (and later recede). In the case of this simple terrain, a flood event can be represented by extruding a polygon traced over the site boundary in TopPlan view. The height of the extrude will represent the water table/flood extent at the moment chosen (often the moment of max predicted flooding). To find the volume of flood water, use the Subtract Solids command (modeling menu). Subtract the terrain from the extrude (enable option to retain the subtracting object - or use a duplicate of the terrain model). Apply the Volumetric Properties command to report the volume. If visible surface area is needed, apply the Extract Surface tool to each “pool”. Apply a water texture to these surfaces as suggested by@herbieherb A more complicated, or stepped site with retaining walls, buildings and other constructed elements, water falls, swales with significant fall (running streams or current), may require several water table solids with tilted tops instead of extrudes, and separate solid subtractions at the several levels. For these it may be best to duplicate the file so that the terrain and all the other site elements can be combined into a single Solid Addition object on a single layer. If the Solid addition process becomes balky, it may be beneficial to add the site objects in batches and convert the result to Generic Solid each time. Separate, smaller extrudes or other solids represent the flood at each differentiated area of the site. Solid subtract the combo terrain element object from the solid at each area and copy paste or reference into a new layer in the original file. Sheet drainage and incidental puddles (wheel ruts, worn pathways, slight low spots in paving, etc) can be handled as low extrudes or 3dPolys or NURBS Surfaces with dirty water texture drawn over appropriate areas. Or, the Project tool, Landscape Area tool, or even the Spoil Pile Tool can establish these shapes and accept the texture. Post back if this isn’t working or if help needed. -B Edited March 13, 2020 by Benson Shaw Drawing state Quote Link to comment
Vectorworks, Inc Employee Luis M Ruiz Posted March 19, 2020 Vectorworks, Inc Employee Share Posted March 19, 2020 I was curious myself on creating a similar animation, specially with the event we had a few years back in Maryland. Here is my test. Flood animation.mp4 4 Quote Link to comment
Pat Stanford Posted March 19, 2020 Share Posted March 19, 2020 Very nice Luis. I assume that you used the polygon method suggested by Benson and raised the level by a few inches for each frame? What were the steps to create the animation? Quote Link to comment
Vectorworks, Inc Employee Luis M Ruiz Posted March 19, 2020 Vectorworks, Inc Employee Share Posted March 19, 2020 Nope. I needed a tool that can raise the face dynamically. Subdivision is the correct tool for these types of animations. Granted, all I needed is to record my screen at the same time. 2 Quote Link to comment
Vectorworks, Inc Employee Tony Kostreski Posted March 19, 2020 Vectorworks, Inc Employee Share Posted March 19, 2020 I've done similar with multiview—one perspective view and one elevation (ortho mode) using nudge command 😉. Screen recording of just one screen. 1 Quote Link to comment
Lisar Posted July 13, 2021 Share Posted July 13, 2021 Cool animation Luis. Maybe you could do a “how-to” / tips and tricks video on that? 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.