Jump to content

CRASH! - Insert connection tool


Recommended Posts

When trying to connect the circular truss in the attached file to the top tri truss, i get a repeatable instant crash.  I am using a hoist symbol as the connection.  It does not matter if the truss circular truss is flat or at an angle.

 

The connection I am attempting is this:

 

image.thumb.png.4c8ce85e4d8cb0fa1ef051d0946a05c2.png

 

Also on the rare occasions that it does not crash, the low hook of the hoist does not appear in the correct position, it sits directly below the circle as if it was not at an angle.  The Z value of the hook is the same as the centre of the circle truss or possibly the Z value of the start of the truss section it is attaching to1:

 

image.thumb.png.7f502f84afdc36d878d2f19cea714d53.png

 

Looks like another annoying bug that us paying beta testers now expect to come across.

 

VW 2020 SP1

Windows 10

truss connection crash.vwx

Edited by Mike Wright
Link to comment
  • Vectorworks, Inc Employee

Hi Mike

 

Just out of interest if the flown circular truss is horizontal when you make the connection then rotate it with the 2d rotate tool on screen plane from that connection do you still get the crash?

 

I will take a look at your file.

 

All the best

 

Tom W

Link to comment
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...