Jump to content
chrispolo

Best way to create roof by NURBS curves or Curved Lines

Recommended Posts

How can I create a roof from this 4 Curved Lines or NURBS ?

I'll also need to add structure to this roof like steel or other..

HYBRID HABITAT1-Backup-20190212121511.png

Share this post


Link to post

Just use 2 of the  curves

Loft with One Rail

Then Shell

image.thumb.png.f5e3e3db2622190f27889c9d6a2cb9d8.png

  • Like 3

Share this post


Link to post

Thank you all for the advices! I managed to do it with NURBS curves and create surface from curves. Before I couldn't do it because I had drawn normal curves but with NURBS works greatly! Here's a picture of what I get

- Used Surface array to create structure.

image.thumb.png.af3f3594bb6e6f35ff3e03f246e417e1.png

 

@Benson Shaw Thanks for the advices and the file, is really helping! I was thinkin to change the form of the roof later like you did in 2A or 2B. Because the idea is to create a green roof where the people can walk over as a public space..

 

My next question now will be how to create columns like this:

_MG_1798.thumb.jpg.29aabdabcea4b9a14ba4d8dba968835b.jpg

I guess this is parametric architecture created with scripts and algoritms but can it be done in my model without any script?

  • Like 1

Share this post


Link to post

Looking at the photo:

Prepare a base subdivision surface.

Then use the create contours tool or use surface array. Depends on the case. If you will use surface array, remember to convert it to nurbs first.
Here is an example on one of our projects:

123225985_ScreenShot2019-02-15at1_16_28PM.thumb.png.5aa61292fc04b6bee9e2cc2b6f176d67.png

 

Also, as you said, with a Marionette script is going to be better. 

 

  • Like 2

Share this post


Link to post
On 2/13/2019 at 11:24 PM, Benson Shaw said:

Here are a few examples using NURBS modeling with some of the pitfalls and some corrections.

It's not a full blow by blow tutorial, but can get started.

14 hours ago, Benson Shaw said:

Attached find my basic setup.  It's not perfect, but really close.

 

Benson, these examples are amazing as always!

Kevin

 

  • Like 1

Share this post


Link to post

All - Hard to let this go.  Here is improved method.  Refinement is to assure constant width to face of beams.  Solution is to map the centerlines of the beam faces onto the funnel, then use each ctr line as path for Extrude Along Path of a circle.  The EAP will intersect the funnel at constant width.

 

vwx 2019 file with this v2 info now in Dropbox:

https://www.dropbox.com/s/0wi7ot7oe2pfltn/StarLattice2.vwx?dl=0

 

Did anyone figure out the Marionette network for this?

Or did anyone try surface array or other way to at least map the pattern onto a surface?

 

-B

StarLattice v2.png

  • Like 2

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...