Jackson99 Posted January 28, 2019 Share Posted January 28, 2019 Hi all, I regularly encounter a strange issue when using the Line into Segment tool under Drafting Aid. I'm not sure why but when I select Place Loci, my loci points don't line up with the line I've placed and place them off-centre. I've attached a before and after screenshot. Has anyone else encountered this and have a solution? I'm sure it's a simple fix, a setting I haven't set... Thanks in advance! Quote Link to comment
0 markdd Posted January 28, 2019 Share Posted January 28, 2019 The command works perfectly here. Have you tried running the same command in a clean file? If you post the file here or via PM I could take a look.... Quote Link to comment
0 Jackson99 Posted January 28, 2019 Author Share Posted January 28, 2019 Hello Mark, Yes I tried the same command in a blank doc and it worked fine. Here's the file... Thanks a lot for taking a look. Jack test file.vwx Quote Link to comment
0 Jackson99 Posted January 28, 2019 Author Share Posted January 28, 2019 I noticed that this file worked fine in terms of the loci lining up however when I copied in the 3D elevation, they were off again. Very bizarre... Quote Link to comment
0 markdd Posted January 28, 2019 Share Posted January 28, 2019 I tried in your test file and all works as it should do. I don't really understand what you mean by: "when I copied in the 3D elevation, they were off again" Quote Link to comment
0 Kevin McAllister Posted January 28, 2019 Share Posted January 28, 2019 1 hour ago, Jackson99 said: I noticed that this file worked fine in terms of the loci lining up however when I copied in the 3D elevation, they were off again. Very bizarre... Note that many of the Drafting Aid commands only work properly in Top/Plan view. In the case of the Line into Segments command, it draws 2d loci and they are always on the ground plane. These limitations can be significant if you do a lot of layout work. Kevin Quote Link to comment
0 Jackson99 Posted January 28, 2019 Author Share Posted January 28, 2019 Thanks for testing it Mark. Basically prior to copying in the model and it was a blank doc, the loci's stuck to their line but after bringing in the model, they would then be off. Kevin that's interesting to know and I think that's the reason. So I often need to use this tool to spay objects out on an elevation (i.e not in Top/Plan). Is there a solution for using the line-split tool with loci's in this way or can it only be used in Top/Plan? Is there an alternative tool for 3D? Thanks for your time guys! Quote Link to comment
0 Benson Shaw Posted January 29, 2019 Share Posted January 29, 2019 (edited) On 1/28/2019 at 8:24 AM, Jackson99 said: Is there an alternative tool for 3D? Duplicate Along Path would be one way to distribute 3d loci along and edge or path. Any view. It has prefs for number or loci or spacing. Create the path by tracing the edge with 3d Poly tool or NURBS Curve tool or via Extract Surface in Edge mode. Create a 3d locus anywhere that allows you to see/select the path and the locus. Select the new path and locus. Invoke the DAP command (in the Edit menu), choose your prefs, click OK. Result is selection of new 3d loci. Often best to group them while they are all selected. Apply class or attributes. Note: DAP is quite versatile. It works for 2d and 3d paths. Works with 2d and 3d objects on any path. Works in in any view. HTH -B Edited January 29, 2019 by Benson Shaw details, details, details 2 Quote Link to comment
0 Kevin McAllister Posted January 29, 2019 Share Posted January 29, 2019 On 1/28/2019 at 8:24 AM, Jackson99 said: So I often need to use this tool to spay objects out on an elevation (i.e not in Top/Plan). Is there a solution for using the line-split tool with loci's in this way or can it only be used in Top/Plan? Is there an alternative tool for 3D? I often do my layout work using Screen Plane objects so they easily transfer between views and snaps work as expected. Often its easiest to option drag a shape (a rectangle for window mullions) to create a number of duplicates, drag the first and last shape into place and use Align/Distribute Objects (Command = or Right Click contextual menu) to divide up the space. If you know the spacing, use the Move By Points tool in copy mode to duplicate and space objects. I tend to let VW do the thinking and the math where I can. Working with 2d objects to define a layout and then extruding them (or replacing them using Modify>Convert>Replace with Symbol) is a good strategy. Kevin 2 Quote Link to comment
0 Benson Shaw Posted January 30, 2019 Share Posted January 30, 2019 7 hours ago, Kevin McAllister said: If you know the spacing, use the Move By Points tool Or use the Move by Points tool in Distribute mode. No need to know spacing. Place initial locus at one end of edge. Set number of dupes. Choose pref to Retain Original. Click both ends of the edge. Result is loci evenly spaced along the edge. MBP only works on straight edges. -B 2 Quote Link to comment
0 Jackson99 Posted January 30, 2019 Author Share Posted January 30, 2019 Thank you Benson and Kevin, that's much appreciated. They're excellent solutions, will give them a shot today! Cheers! Quote Link to comment
0 markdd Posted January 30, 2019 Share Posted January 30, 2019 (edited) Don't forget the Snap to Distance option which will divide most edges and vertices into equal segments. I use it all the time if I want to divide a line into segments for distributing items. Just double-click the tool and set your preference. Edited January 30, 2019 by markdd 4 Quote Link to comment
0 Jackson99 Posted January 30, 2019 Author Share Posted January 30, 2019 Of course, I never really knew what that did. Thanks! Quote Link to comment
Question
Jackson99
Hi all,
I regularly encounter a strange issue when using the Line into Segment tool under Drafting Aid.
I'm not sure why but when I select Place Loci, my loci points don't line up with the line I've placed and place them off-centre.
I've attached a before and after screenshot.
Has anyone else encountered this and have a solution?
I'm sure it's a simple fix, a setting I haven't set...
Thanks in advance!
Link to comment
12 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.