Will Posted November 23, 2018 Share Posted November 23, 2018 Hybrid handbasin symbol with 2D front view, in plan view: Heres the results of that section cut: Rotate both by 30º no other changes, here's the plan view: Heres the section view...uh oh were's the sink gone? Anyone got any ideas? Test file attached. Untitled 2.vwx Quote Link to comment
0 Vectorworks, Inc Employee Tim C. Posted November 26, 2018 Vectorworks, Inc Employee Share Posted November 26, 2018 @Will Hi Will, I wasn't able to figure out why this particular symbol is having problems, but if I re-create it the problem goes away. I've submitted a bug report for our engineers to take a look, but if there's any more info you can offer on how the symbol was created it might give us a better clue. Thanks for your help! Quote Link to comment
0 Will Posted November 27, 2018 Author Share Posted November 27, 2018 15 hours ago, Tim C. said: @Will Hi Will, I wasn't able to figure out why this particular symbol is having problems, but if I re-create it the problem goes away. I've submitted a bug report for our engineers to take a look, but if there's any more info you can offer on how the symbol was created it might give us a better clue. Thanks for your help! Hi Tim, I created a new file from a standard vectorworks metric template, imported a dwg from a supplier, created a symbol from the plan view and then copied and pasted the front view into front view of the symbol. Should the front view geometry be on layer plane, 3d plane or screen? @Tim C. Quote Link to comment
0 Will Posted November 27, 2018 Author Share Posted November 27, 2018 (edited) So I can recreate the problem by starting a brand new blank metric template. Draw a rectangle in plan. Create symbol based on the the rectangle. Switch to symbol front component, draw another rectangle. Create a section viewport on a sheet layer. Verify that the section shows the front component rectangle. Rotate the section cut line and the symbol by 30º. Verify that the front rectangle has disappeared. Results of this process are in the attached file. No data was imported, it was a fresh copy of an unaltered vectorworks supplied template and nothing more complicated than a rectangle was used. Seems like a bug in the 2d components feature to me? EDIT: But I'd really love to be wrong as I have a load of bathroom elevation drawings to knock out which I could have done in no time at all if I can get this working! Untitled 3.vwx Edit System specs. VW 2019 SP2. MacOS Mojave 10.14.1. MacBookPro Retina (Mid 2014) 2.5Ghz i7. 16Gb RAM. NVIDA GeForce GT 750M 2Gb VRAM. Edited November 27, 2018 by Will Quote Link to comment
0 Vectorworks, Inc Employee Matt Panzer Posted November 27, 2018 Vectorworks, Inc Employee Share Posted November 27, 2018 Hi @Will , The problem you're having is actually due to the bug Tim reported. The issue is that the section viewport thinks it's cutting through the symbol if the section line passes through the symbols bounding box: Since it thinks its cutting the symbol and your symbol has no geometry in its 3D component and no geometry in its Front and Back Cut component, the section viewport has nothing to show. If you add geometry to one of those components, you will see it display in the viewport. Also, if you drag the section line further away from the symbol so that it's outside the symbol's bounding box, you should see the Front component. 1 Quote Link to comment
0 Vectorworks, Inc Employee Matt Panzer Posted November 27, 2018 Vectorworks, Inc Employee Share Posted November 27, 2018 Just to clarify, the symbol in your first file still has issues. Adding 3D or 2D cut components still do not show as they would in your "Untitled 3.vwx" file. 1 Quote Link to comment
0 Will Posted December 5, 2018 Author Share Posted December 5, 2018 (edited) Also, can someone tell me, is there a tolerance on how orthogonal the a view needs to be? E.g. If a toilet is on a wall that is at an angle of 30.002º and the interior elevation marker is placed at an angle of 29.999º is that going to work? I'm having real problems with some interior elevations not showing the 2d components. Thanks W Edited December 5, 2018 by Will Quote Link to comment
0 Vectorworks, Inc Employee Matt Panzer Posted December 5, 2018 Vectorworks, Inc Employee Share Posted December 5, 2018 Hi Will, The current design has virtually no tolerance. So, in your example, you would not see the 2D component. We will be investigating possibilities of loosening this up in the future. Please do request this in the "Wishes" forum. More user requests and feedback could help push this sooner than later. 1 Quote Link to comment
0 Will Posted December 5, 2018 Author Share Posted December 5, 2018 Do you think that's something that might be in a service pack as there are often instances where a wall or component is slightly out. Is the tolerance tighter than the max decimal places (in degrees) we can see in vectorworks because I'm still having problems with interior elevation viewports. I've got a set of symbols with front and side 2d components and they are working fine in two out of 3 rooms, but my last interior elevation marker is not generating drawings with 2d components. I have switched on all layers and classes, verified that it is orthogonal to the max number of decimal places. I duplicated an interior elevation marker that I know is working in another room and checked the section lines, just not seeing any 2D components at all. Thanks W Quote Link to comment
0 Vectorworks, Inc Employee Matt Panzer Posted December 5, 2018 Vectorworks, Inc Employee Share Posted December 5, 2018 @Will, Could you send the file to me privately? I can recreate the problem, but sometimes real user files better demonstrate the issue. Quote Link to comment
0 Will Posted December 6, 2018 Author Share Posted December 6, 2018 Hi Matt, I tried to PM you. Not sure if you received the file? Quote Link to comment
0 Vectorworks, Inc Employee Matt Panzer Posted December 6, 2018 Vectorworks, Inc Employee Share Posted December 6, 2018 Hi Will, I received the message but do not see a file. Quote Link to comment
Question
Will
Hybrid handbasin symbol with 2D front view, in plan view:
Heres the results of that section cut:
Rotate both by 30º no other changes, here's the plan view:
Heres the section view...uh oh were's the sink gone?
Anyone got any ideas? Test file attached.
Untitled 2.vwx
Link to comment
11 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.