Josh NZ Posted July 17, 2017 Share Posted July 17, 2017 At some stage int he last 6 months or so it appears that when an awning window is shown as part of a door combo, the opening arrows appear upside down. You can see below the 4 awning windows to the left with arrows shown like "^^^^" this is the NZ standard. The awning window in the door however shows "v". Is this a setting, if so where do I find it. Thank in advance. Quote Link to comment
Michael H. Posted July 17, 2017 Share Posted July 17, 2017 In the OIP there's a setting for WinDoor arrows for different situations, e.g. Reversed inside and out, 3D only etc. Quote Link to comment
Josh NZ Posted July 17, 2017 Author Share Posted July 17, 2017 Hi Michael, thanks for the reply, I did try those different options however it only flips left, right inside out etc, not the one window upside down. Quote Link to comment
AlanW Posted July 17, 2017 Share Posted July 17, 2017 (edited) @Josh NZSee attached for flipping the arrow. As Mike H said Edited July 17, 2017 by Alan Woodwell Quote Link to comment
Michael H. Posted July 18, 2017 Share Posted July 18, 2017 As Alan noted, make sure the selection has the word "Rev" in it. Rev = Reversed direction arrow. If you're still having problems, maybe upload a Vectorworks file with the problem WinDoor so we can have a play around with it. Hope that helps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.